| Author |
Message
|
| saransara |
 Posted: Wed Sep 07, 2011 9:23 pm Post subject: MQ AMQ9209 and AMQ9228 error in error logs |
 |
|
Newbie
Joined: 07 Sep 2011
Posts: 1
|
Hi all,
Please help me with this. i am getting this two errors continously. I browsed through net and get this action "prevent port scanning" as a solution. But i dont know how to do it.. please guide me in this.
my error logs
9/7/2011 13:05:30
AMQ9209: Connection to host 'ZDTVB (10.145.3.12)' closed.
EXPLANATION:
An error occurred receiving data from 'ZDTVB (10.145.3.12)' over TCP/IP. The
connection to the remote host has unexpectedly terminated.
ACTION:
Tell the systems administrator.
----- amqccita.c : 2781 -------------------------------------------------------
9/7/2011 13:05:31
AMQ9228: The TCP/IP responder program could not be started.
EXPLANATION:
An attempt was made to start an instance of the responder program, but the
program was rejected.
ACTION:
The failure could be because either the subsystem has not been started (in this
case you should start the subsystem), or there are too many programs waiting
(in this case you should try to start the responder program later). The reason
code was 0. |
|
| Back to top |
|
 |
| Vitor |
| Posted: Thu Sep 08, 2011 4:00 am Post subject: Re: MQ AMQ9209 and AMQ9228 error in error logs |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| saransara wrote: |
| I browsed through net and get this action "prevent port scanning" as a solution. But i dont know how to do it.. |
Speak to your network people (or whoever's running the port scanner) and tell them to stop scanning that port.
Seriously.
There's nothing in WMQ you can do .
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| PeterPotkay |
| Posted: Thu Sep 08, 2011 8:53 am Post subject: |
|
|
Poobah
Joined: 15 May 2001
Posts: 7722
|
I suppose you could suppress those 2 Reason Codes for the QM so they don't clog the log.
_________________
Peter Potkay
Keep Calm and MQ On |
|
| Back to top |
|
|
| Vitor |
| Posted: Thu Sep 08, 2011 9:32 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| PeterPotkay wrote: |
| I suppose you could suppress those 2 Reason Codes for the QM so they don't clog the log. |
Valid point. Doesn't fix the problem, but provided the problem is only ever caused by a port scanner it offers relief.
Roughly analogous to putting tape over the "check engine" light on your dashboard. It's no problem as long as you're absolutely certain what's incorrectly causing the warning and nothing else happens.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| issac |
| Posted: Thu Sep 08, 2011 6:29 pm Post subject: |
|
|
Disciple
Joined: 02 Oct 2008
Posts: 158
Location: Shanghai
|
Nothing to worry about. Sb has just telneted your port, or did sth similar.
_________________
Bazinga! |
|
| Back to top |
|
|
|
|
