| Author |
Message
|
| HenriqueS |
 Posted: Thu Sep 11, 2008 12:12 pm Post subject: Channels does not connect |
 |
|
Master
Joined: 22 Sep 2006
Posts: 235
|
Folks,
We have a channel that refuses to conect to the remote system.
-There is no firewall between the 2 hosts
-The receiver channel is created on the remote site.
-I tried stopping and resolving the sender (origin) channel. It did not solve the problem.
-As soon the sender channel is started it keeps trying
-We did reset the sequence numbers on both endpoints, but it did not work either.
-We created another transmission queue on the origin system and this seemed to work, but we need to go back using the old name (because this old name is referenced by COA/CODs to find their way back).
The log messages on the origin system (I translated the messages, it is a localized Windows system and the messages are all sent in my language):
ORIGIN SYSTEM
| Code: |
----- amqrccca.c : 820 --------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9002: The channel 'CSWIFT.MESI.03' is starting
EXPLAIN:
The channel 'CSWIFT.MESI.03' is starting.
ACTION:
None.
-------------------------------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9507: The channel 'CSWIFT.MES.03' is in doubt.
EXPLAIN:
It is not possible do finish the asked operatuin because the channel ins invalid to the central system 'QM.SBCDF355'.
ACTION:
Verify the channel status and restart the channel to process the invalid state or use the command RESOLVE CHANNEL to fix the problem manually.
----- amqrmrca.c : 1624 -------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9999: Channel program finished abnormally.
EXPLAIN:
The channel program 'CSWIFT.MESI.03' is shutdown in an abnormal way.
ACTION:
Check previous messages from the channel program
'CSWIFT.MESI.03' in the error files to find the cause for the failure.
----- amqrccca.c : 820 --------------------------------------------------------
|
The messagen on the remote system is below, it just says that is starting the receiver channel and soon after that it ends 'normally'...
REMOTE SYSTEM
| Code: |
09/11/08 16:52:53 - Process(11832.591073) User(mqm) Program(amqrmppa)
AMQ9002: Channel 'CSWIFT.MESI.03' is starting.
EXPLANATION:
Channel 'CSWIFT.MESI.03' is starting.
ACTION:
None.
-------------------------------------------------------------------------------
09/11/08 16:52:53 - Process(11832.591073) User(mqm) Program(amqrmppa)
AMQ9001: Channel 'CSWIFT.MESI.03' ended normally.
EXPLANATION:
Channel 'CSWIFT.MESI.03' ended normally.
ACTION:
None.
|
_________________
HenriqueS
Certified Websphere MQ 6.0 System Administrator |
|
| Back to top |
|
 |
| bruce2359 |
| Posted: Thu Sep 11, 2008 2:30 pm Post subject: |
|
|
Poobah
Joined: 05 Jan 2008
Posts: 9470
Location: US: west coast, almost. Otherwise, enroute.
|
| Quote: |
ACTION:
Verify the channel status and restart the channel to process the invalid state or use the command RESOLVE CHANNEL to fix the problem manually. |
Did you do this? Did you use the RESOLVE CHANNEL command as the error message suggested? What was the result?
It appears you used the RESET CHANNEL command.
_________________
I like deadlines. I like to wave as they pass by.
ב''ה
Lex Orandi, Lex Credendi, Lex Vivendi. As we Worship, So we Believe, So we Live. |
|
| Back to top |
|
|
| gbaddeley |
| Posted: Thu Sep 11, 2008 4:19 pm Post subject: |
|
|
Jedi Knight
Joined: 25 Mar 2003
Posts: 2538
Location: Melbourne, Australia
|
| Quote: |
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9507: The channel 'CSWIFT.MES.03' is in doubt.
EXPLAIN:
It is not possible do finish the asked operatuin because the channel ins invalid to the central system 'QM.SBCDF355'.
ACTION:
Verify the channel status and restart the channel to process the invalid state or use the command RESOLVE CHANNEL to fix the problem manually. |
Did you modify the text of this message? In the MQ Messages manual AMA9507 is given as:
| Quote: |
AMQ9507 Channel <insert_3> is currently in-doubt.
Severity: 30 : Severe error
Explanation: The requested operation cannot complete
because the channel is in-doubt with host <insert_4>.
Response: Examine the status of the channel, and
either restart a channel to resolve the in-doubt state, or
use the RESOLVE CHANNEL command to correct the
problem manually. |
_________________
Glenn |
|
| Back to top |
|
|
| exerk |
| Posted: Fri Sep 12, 2008 12:48 am Post subject: |
|
|
Jedi Council
Joined: 02 Nov 2006
Posts: 6339
|
| gbaddeley wrote: |
| ...Did you modify the text of this message?... |
| HenriqueS wrote: |
| I translated the messages, it is a localized Windows system and the messages are all sent in my language |
_________________
It's puzzling, I don't think I've ever seen anything quite like this before...and it's hard to soar like an eagle when you're surrounded by turkeys. |
|
| Back to top |
|
|
| HenriqueS |
| Posted: Mon Sep 15, 2008 10:53 am Post subject: |
|
|
Master
Joined: 22 Sep 2006
Posts: 235
|
Folks, I noticed something really weird here:
----- amqrccca.c : 820 --------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9002: The channel 'CSWIFT.MESI.03' is starting
EXPLAIN:
The channel 'CSWIFT.MESI.03' is starting.
ACTION:
None.
-------------------------------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9507: The channel 'CSWIFT.MES.03' is in doubt.
EXPLAIN:
It is not possible do finish the asked operatuin because the channel ins invalid to the central system 'QM.SBCDF355'.
ACTION:
Verify the channel status and restart the channel to process the invalid state or use the command RESOLVE CHANNEL to fix the problem manually.
----- amqrmrca.c : 1624 -------------------------------------------------------
11/9/2008 16:43:19 - Process(9944.1) User(MUSR_MQADMIN) Program(runmqchl.exe)
AMQ9999: Channel program finished abnormally.
EXPLAIN:
The channel program 'CSWIFT.MESI.03' is shutdown in an abnormal way.
ACTION:
Check previous messages from the channel program
'CSWIFT.MESI.03' in the error files to find the cause for the failure.
----- amqrccca.c : 820 --------------------------------------------------------
If you pay attention, internally the channel program is referring to a CSWIFT.MES.03 where as it should refer to CSWIFT.MESI.03 .
The CSWIFT.MES.03 is another channel that points in fact to another machine.
Worst, I deleted such channel, and the LOG message still referring to it.
I guess I have some corrupted object repository. Is this possible? Is there any previous cases of this happening?
_________________
HenriqueS
Certified Websphere MQ 6.0 System Administrator |
|
| Back to top |
|
|
| HenriqueS |
| Posted: Fri Sep 19, 2008 1:34 pm Post subject: |
|
|
Master
Joined: 22 Sep 2006
Posts: 235
|
Folks, after contacting IBM, we realized that our object repository was corrupted.
We extracted the definitions using the SAVEQMGR utility and replayed it back over a fresh qmgr. IT WORKED.
_________________
HenriqueS
Certified Websphere MQ 6.0 System Administrator |
|
| Back to top |
|
|
| Mattmanx |
| Posted: Tue Sep 23, 2008 6:54 am Post subject: |
|
|
Newbie
Joined: 23 Sep 2008
Posts: 4
|
| Good to know -- we faced a similar problem in the past |
|
| Back to top |
|
|
|
|
