| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
| What are the requirements for message listeners? |
« View previous topic :: View next topic » |
| Author |
Message
|
| Vitor |
 Posted: Thu Nov 18, 2010 7:21 am Post subject: |
 |
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| mqjeff wrote: |
| The supportPac and the product are "the same release", at least at current levels... there have been previous posts from someone who appears to be on the XMS team that indicate this. |
But this is not guaranteed to be the same forever, as a general principle v7 removes the requirement for the support pac and I feel these are important points for future readers.
I agree it's not like MA88.
Where it may be relevant here is where the OP said:
| DaeMoohn wrote: |
| we reinstalled XMS because it wasn't properly installed there |
Depending on what exactly is meant by this, I suspect the install is becoming corrupt when the support pac's being put over the WMQ install.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
 |
| DaeMoohn |
| Posted: Thu Nov 18, 2010 11:53 pm Post subject: |
|
|
Apprentice
Joined: 04 Jun 2010
Posts: 26
|
| Vitor wrote: |
| DaeMoohn wrote: |
| We reverted to 7.0.1.2 client and XMS 2.0.0.2. |
| fjb_saper wrote: |
| With V7 XMS is part of the distribution. You should no longer be using the fix pack. |
 |
The client instalation that we had for 7.0.1.3 wasn't with XMS maybe (I am not supposed to official install MQ clients, but when I was doing it it worked).
Anyway, now it works. |
|
| Back to top |
|
|
| DaeMoohn |
| Posted: Thu Nov 18, 2010 11:57 pm Post subject: |
|
|
Apprentice
Joined: 04 Jun 2010
Posts: 26
|
| Vitor wrote: |
| mqjeff wrote: |
| The supportPac and the product are "the same release", at least at current levels... there have been previous posts from someone who appears to be on the XMS team that indicate this. |
But this is not guaranteed to be the same forever, as a general principle v7 removes the requirement for the support pac and I feel these are important points for future readers.
I agree it's not like MA88.
Where it may be relevant here is where the OP said:
| DaeMoohn wrote: |
| we reinstalled XMS because it wasn't properly installed there |
Depending on what exactly is meant by this, I suspect the install is becoming corrupt when the support pac's being put over the WMQ install. |
What I was saying there was that XMS wasn't found in add remove programs. Even after installing XMS 2.0.0.3 (from IA9H) correctly we weren't able to receive notifications.
So, in our environment, remote MQ server + local MQ server 6.0.2.7 + 7.0.1.3 client + XMS 2.0.0.3 didn't work. I am not claiming the client and XMS are flawed. They just didn't work for us.
What did work was emote MQ server + local MQ server 6.0.2.7 + 7.0.1.2 client + XMS 2.0.0.2.
XMS 2.0.0.2 is from the suport pac on the IBM website.
Last edited by DaeMoohn on Fri Nov 19, 2010 12:00 am; edited 1 time in total |
|
| Back to top |
|
|
| DaeMoohn |
| Posted: Thu Nov 18, 2010 11:59 pm Post subject: |
|
|
Apprentice
Joined: 04 Jun 2010
Posts: 26
|
| mqjeff wrote: |
The supportPac and the product are "the same release", at least at current levels... there have been previous posts from someone who appears to be on the XMS team that indicate this.
I don't think playing around with software levels in general is going to do a lot to resolve this particular issue. As a troubleshooting point, it is a usual reasonable approach to confirm that the issue still occurs at the current level.
Other general troubleshooting points are
- Compare the working and the non-working system at a very high level of detail
- Take MQ client level traces on both the working and non-working system and compare the results
- improve the amount of logging that the application does to provide a very fine grain of detail about steps taking and results given
- Open a PMR and work with IBM and XMS support.
|
You are right, but we cannot revert to the old server. I am not in position to enforce that. For the time being it works and we are satisfied. |
|
| Back to top |
|
|
| Vitor |
| Posted: Fri Nov 19, 2010 5:02 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| DaeMoohn wrote: |
| The client instalation that we had for 7.0.1.3 wasn't with XMS maybe |
Yes it is.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
