| Author |
Message
|
| Porcupine00 |
 Posted: Tue Aug 17, 2010 11:09 am Post subject: RfhUtil Load Q problem |
 |
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
Hi everyone,
I hope someone here can help me with my issue, since the whole team of IT people couldn't get it.
I have MQ Client and MQ Explorer 7.0 together with RfhUtil 7.0 installed on my PC.
Everything works perfect except one thing, Load Q option in RfhUtil.
When I choose a proper queue file (that works for my colleagues) with one or multiple messages and load it through Load Q it does not capture MQ Message Format (stays blank) under MQMD tab, the message of course ends up in an error queue. Matter of fact, none of the tabs in RfhUtil are being properly filled, most being blank. When I open it in the error queue, the message has MQ message format and other MQ data, which has to be stripped by MQ, as a first line of that message.
The interesting part is that if I will take a file with single message in it, and use Open File option and then Write Q, then everything works perfectly, but the same file will not work through Load Q option.
I am ok with doing Open File – Write Q, but that means that I cannot load a queue with multiple messages, something that I want to do.
The same RfhUtil had been tested on other PCs successfully, I had compared Environment Variables with others and they look the same. What could be the issue? Any ideas? I appreciate your help. |
|
| Back to top |
|
 |
| Vitor |
| Posted: Tue Aug 17, 2010 11:14 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
How did you generate the file you're trying to load?
I've also moved this to a more relevant section.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| Porcupine00 |
| Posted: Tue Aug 17, 2010 11:21 am Post subject: |
|
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
| Thanks Vitor for quick response. I’ve generated the file in different ways, starting with templates we have, ending with I believe the most correct way to generate the file – through Save Q option. |
|
| Back to top |
|
|
| zpat |
| Posted: Tue Aug 17, 2010 11:32 am Post subject: |
|
|
Jedi Council
Joined: 19 May 2001
Posts: 5866
Location: UK
|
| When you saved the queue data, did you choose to save the MQMD or not? |
|
| Back to top |
|
|
| Porcupine00 |
| Posted: Tue Aug 17, 2010 11:41 am Post subject: |
|
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
| Yes, I am including MQMD and Headers when saving the queue. I leave everything as a default |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Aug 17, 2010 11:48 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
| Have you contacted the author of this SupportPac? |
|
| Back to top |
|
|
| Porcupine00 |
| Posted: Tue Aug 17, 2010 11:57 am Post subject: |
|
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
Who is the author of a SupportPack? I was under impression that RfhUtil is unsupported IBM product.
Is there any specific environment variables that have to be set on a PC for RfhUtil to work properly? |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Aug 17, 2010 12:11 pm Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
IH03 is a Category 2 SupportPacs. This means that the IBM Corporation provides it without warranty or support.
Most Category 2 SupportPacs are supported by the author or maintainer of said SupportPac, however.
The information about said author or maintainer is usually in the documentation that comes with the SuportPac. In the case of IH03, it's pretty prominently on the title page of ih03.pdf. |
|
| Back to top |
|
|
| Vitor |
| Posted: Tue Aug 17, 2010 12:25 pm Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| Porcupine00 wrote: |
| Is there any specific environment variables that have to be set on a PC for RfhUtil to work properly? |
And in this instances it's working, it's not just performing one single function. Doesn't sound like an environment variable problem really.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| Porcupine00 |
| Posted: Wed Aug 18, 2010 5:27 am Post subject: |
|
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
I've send the email to Jim MacNair (SupportPack author). We'll if he'll care to respond.
Meanwhile, any ideas might anyone have? |
|
| Back to top |
|
|
| Porcupine00 |
| Posted: Wed Aug 18, 2010 7:22 am Post subject: |
|
|
Newbie
Joined: 17 Aug 2010
Posts: 6
|
The issue had been resolved with RfhUtil 7.0.2.
Thanks everybody for help.
By the way, Jim MacNair from IBM had replied very promptly, and is a very nice guy. |
|
| Back to top |
|
|
| Abhi |
| Posted: Fri Sep 23, 2011 12:58 pm Post subject: |
|
|
Novice
Joined: 10 Mar 2011
Posts: 19
|
Hi All,
Using the Old post .. I've a very similar problem where thousands of msgs failed in Prod. So we took a backup of all these failed msgs in multiple files (having multiple msgs in single file with the delimiter) and folders ( havin multiple files, single msg per file). Now that defect is fixed I need to put all failed msg back to input Queue from these files and folders.
I'm using RfhUtil 7.0.2 and still it doesn't work for me. I'm able to open file and write a single message to the queue but not able to use the Load all functionality.
When I try doing that with default selection it says:
| Code: |
| 2035 Not authorized (Open) |
when try setting values for 'Max Count' and 'Start Files Number', it says:
| Code: |
Unable to open input file C:\Deployments\SAP_Failed\SAP_FailedMsg0.xml
0 messages added from 0 files
|
@Porcupine00 : Do you remember setting any special permissions for this purpose?
Any help is very much appreciated.
Thanks in Advance
Abhi |
|
| Back to top |
|
|
| zpat |
| Posted: Fri Sep 23, 2011 11:15 pm Post subject: |
|
|
Jedi Council
Joined: 19 May 2001
Posts: 5866
Location: UK
|
Abhi - you would be MUCH better off using MO71 unload/reload for this purpose.
Take some to explore the (new version of) MO71 support pac - you won't regret it. |
|
| Back to top |
|
|
| Abhi |
| Posted: Sat Sep 24, 2011 12:58 am Post subject: |
|
|
Novice
Joined: 10 Mar 2011
Posts: 19
|
Hi Zpat,
Thanks for your response. But I've 2 questions now:
1. We have already done Save Q using Rfhutil, will we able to put these these files using MO71. Isn't there a difference in understandable file format of rfhutil and MO71?
2. I Actually used MO71 and tried to put msg using a single file with multiple msgs. It again gives me :
| Code: |
| MQOPEN on object PLDM.ECC1.TEST returned 2035 Not authorized.. |
How is it possible that open file and write Q for a single message works and still I've some authorization issues using Load Q ?
Please advice.
Regards,
Abhi |
|
| Back to top |
|
|
| exerk |
| Posted: Sat Sep 24, 2011 1:52 am Post subject: |
|
|
Jedi Council
Joined: 02 Nov 2006
Posts: 6339
|
| Abhi wrote: |
...2. I Actually used MO71 and tried to put msg using a single file with multiple msgs. It again gives me :
| Code: |
| MQOPEN on object PLDM.ECC1.TEST returned 2035 Not authorized.. |
How is it possible that open file and write Q for a single message works and still I've some authorization issues using Load Q ? |
Enable authority events, try again, fault diagnose the content of the event message(s), come back to us when you've done so.
_________________
It's puzzling, I don't think I've ever seen anything quite like this before...and it's hard to soar like an eagle when you're surrounded by turkeys. |
|
| Back to top |
|
|
|
|
