MQSeries.net :: View topic - TimeOut Control/Notification generating GENERICPROPERTYPARSE

williad · Posted: Fri Mar 27, 2009 3:35 am Post subject:

Hi

I hope this make sense:
I have a compute node that is creating a message. Which is connected to a trace node,
and this trace node is connected to a subflow called "Delayed" which contains the TimeOut Control/Notification nodes. The TimeOut Cnntrol/Notification is set to 8 seconds before sending the message onwards. The way i have done this is shown below in a compute node with propagated values for the unique id, and time interval:

SET OutputRoot = InputRoot;

-- Use the interval to determine at what time this message should trigger
DECLARE DELAYINTERVAL INTERVAL;
SET DELAYINTERVAL = CAST(delayInterval AS INTERVAL SECOND);
DECLARE OUTPUTTIMESTAMP TIMESTAMP CURRENT_TIMESTAMP + DELAYINTERVAL;

-- Setup timer
SET OutputLocalEnvironment.TimeoutRequest.Action = 'SET';
SET OutputLocalEnvironment.TimeoutRequest.Identifier = UUIDASCHAR;
SET OutputLocalEnvironment.TimeoutRequest.StartDate = CAST(OUTPUTTIMESTAMP AS DATE);
SET OutputLocalEnvironment.TimeoutRequest.StartTime = CAST(OUTPUTTIMESTAMP AS TIME);
SET OutputLocalEnvironment.TimeoutRequest.Count = 1;
SET OutputLocalEnvironment.TimeoutRequest.IgnoreMissed = FALSE;
SET OutputLocalEnvironment.TimeoutRequest.AllowOverwrite = FALSE;

The output of the "Delayed" subflow is connected to a trace node(1), and the then onto a MQ Output node.

When i look at the first trace message after the compute node i see the following:

44 UserTrace BIP4060I: Data ''( ['MQROOT' : 0x114d51f00]
(0x01000000:Name ):Properties = ( ['MQPROPERTYPARSER' : 0x114cc6268]
(0x03000000:NameValue):MessageSet = 'DL02IJ407Q001' (CHARACTER)
(0x03000000:NameValue):MessageType = 'm_FileFromAdapter' (CHARACTER)
(0x03000000:NameValue):MessageFormat = 'CWF' (CHARACTER)
The trace after the "Delayed" subflow shows

UserTrace BIP4060I: Data ''( ['GENERICROOT' : 0x101e20e10]
(0x01000000:Name ):Properties = ( ['GENERICPROPERTYPARSER' : 0x101e81a28]
(0x03000000:NameValue):MessageSet = 'DL02IJ407Q001' (CHARACTER)
(0x03000000:NameValue):MessageType = 'm_FileFromAdapter' (CHARACTER)
(0x03000000:NameValue):MessageFormat = 'CWF' (CHARACTER)

When the message then goes to a mq output node, it fails. If i take out the timeout subflow, and the compute node connects to the MQ Output node directly, it works fine.

I think the problem is becuase of this GENERICROOT/GENERICPROPERTYPARSER property setting. I dont know why this isnt the same as when the message first went into the Delayed Subflow.

Can someone please point me in the rigfht direction in how to get the message that goes into the Timeout subflow have the same setting when it comes out?

Thanks