| Author |
Message
|
| kats |
 Posted: Tue Dec 12, 2006 12:59 pm Post subject: Channel Retrying.... :oops: |
 |
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Two boxes A and B.
A running on VMS Alpha AXP v7.3-2 with MQ 5.3 CSD 10. QmgrName - QMA
B running on Windows NT with MQ 5.3 CSD 7 QmgrName - QMB
QMA and QMB connect each other via regular SDR/RCVR Channel.
We observed following steps:
1. Upgraded server A from OS level AXP v7.3-1 to OS level AXP v7.3-2
2. Upgraded MQ 5.1 to MQ 5.3 CSD 10.
After installation:
* Channel from QMB to QMA went into retrying status.
While channel from QMA to QMB is working fine.
Upon degrading server A back; i.e. from OS level AXP v7.3-2 to AXP v7.3-1 and also MQ 5.3 CSD10 to MQ 5.1, both channels work fine (they have been working like that so far).
MQ Error log on Server A (VMS):
12/12/06 15:28:41
AMQ9516: File error occurred.
EXPLANATION:
The filesystem returned error code 65535 for file
'/mqs_root/mqm/qmgrs/QMA/@ipcc/AMQRFCDA.DAT'.
ACTION:
Record the name of the file '/mqs_root/mqm/qmgrs/QMA/@ipcc/AMQRFCDA.DAT'
and tell the systems administrator, who should ensure that file
'/mqs_root/mqm/qmgrs/QMA/@ipcc/AMQRFCDA.DAT' is correct and available.
----- BROOT:[LIB.REMOTE]AMQRCDFA.C;1 : 493 ------------------------------------
12/12/06 15:28:41
AMQ9999: Channel program ended abnormally.
EXPLANATION:
Channel program 'QMB to QMA' ended abnormally.
ACTION:
Look at previous error messages for channel program 'QMB to QMA' in
the error files to determine the cause of the failure.
----- SRC_ROOT:[LIB.REMOTE]AMQRMRSA.C;1 : 468 ---------------------------------
and MQ error log on server B (NT):
12/10/2006 11:34:30
AMQ9002: Channel 'QMB to QMA' is starting.
EXPLANATION:
Channel 'QMB to QMA' is starting.
ACTION:
None.
-------------------------------------------------------------------------------
12/10/2006 11:34:31
AMQ9503: Channel negotiation failed.
EXPLANATION:
Channel 'QMB to QMA' between this machine and the remote machine could
not be established due to a negotiation failure.
ACTION:
Tell the systems administrator, who should attempt to identify the cause of the
channel failure using problem determination techniques. For example, look for
FFST files, and examine the error logs on the local and remote systems where
there may be messages explaining the cause of failure. More information may be
obtained by repeating the operation with tracing enabled.
----- amqrmssa.c : 1264 -------------------------------------------------------
12/10/2006 11:34:31
AMQ9999: Channel program ended abnormally.
EXPLANATION:
Channel program 'QMB to QMA' ended abnormally.
ACTION:
Look at previous error messages for channel program 'QMB to QMA' in
the error files to determine the cause of the failure.
ANY CLUE would HELP: |
|
| Back to top |
|
 |
| jefflowrey |
| Posted: Tue Dec 12, 2006 1:25 pm Post subject: Re: Channel Retrying.... :oops: |
|
|
Grand Poobah
Joined: 16 Oct 2002
Posts: 19981
|
| kats wrote: |
Record the name of the file '/mqs_root/mqm/qmgrs/QMA/@ipcc/AMQRFCDA.DAT'
and tell the systems administrator, who should ensure that file
'/mqs_root/mqm/qmgrs/QMA/@ipcc/AMQRFCDA.DAT' is correct and available. |
There also may have been an FDC/FFST file that would have contained more information. In that file there would have been one or more header blocks that contained ProbeIds. You can use the search field at http://www.ibm.com/ to search for support documents related to those ProbeIds, by putting them into the search field.
_________________
I am *not* the model of the modern major general. |
|
| Back to top |
|
|
| kats |
| Posted: Wed Dec 13, 2006 6:44 am Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Thanks Jeff. That's a nice advice.
I'll look into that. |
|
| Back to top |
|
|
| kats |
| Posted: Wed Dec 13, 2006 2:05 pm Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
|
| Back to top |
|
|
| kats |
| Posted: Wed Dec 13, 2006 2:10 pm Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
| ========================================= |
| |
| Date/Time :- Sunday November 19 15:48:37 EST 2006 |
| Host Name :- HBDMGD (Unknown) |
| PIDS :- 5697175 |
| LVLS :- 530.6 CSD06 |
| Product Long Name :- WebSphere MQ for OpenVMS Alpha |
| Vendor :- IBM |
| Probe Id :- RM487001 |
| Application Name :- MQM |
| Component :- rriChannelTerminate |
| Build Date :- Jan 12 2005 |
| CMVC level :- p530-06-L040211 |
| Build Type :- IKAP - (Production) |
| Userid :- [621,4005] (DMG_TPDEV) |
| Program Name :- RUNMQSC.EXE |
| Program Name :- RUNMQSC.EXE |
| Thread :- 00000001 |
| QueueManager :- SWF_TST |
| Major Errorcode :- rrcE_CHANNEL_TERMINATED |
| Minor Errorcode :- OK |
| Probe Type :- MSGAMQ9604 |
| Probe Severity :- 2 |
| Probe Description :- AMQ9604: Channel 'MQHA_TST.TO.SWF_TST' terminated |
| unexpectedly |
| FDCSequenceNumber :- 0 |
| Arith1 :- 545284357 20806105 |
| Arith2 :- 668993179 27e0069b |
| Comment1 :- MQHA_TST.TO.SWF_TST |
| |
| Comment2 :- |
| |
| Comment3 :- |
| |
| VMS Errorcode :- (000008E8) |
| |
| JPI Quota information: |
| ====================== |
| ASTCNT=497/500(99%) * BIOCNT=10000/10000(100%) * |
| BYTCNT=996736/996736(100%) * DIOCNT=10000/10000(100%) * |
| ENQCNT=4990/5000(99%) * FILCNT=93/100(93%) * |
| PAGFILCNT=984752/1000000(98%) * TQCNT=1000/1000(100%) * |
| FREPTECNT=2147483647 APTCNT=0 |
| GPGCNT=2992 PPGCNT=2944 |
| VIRTPEAK=226704 DFWSCNT=5936 |
| WSAUTH=11872 WSAUTHEXT=786432 |
| WSEXTENT=786432 WSPEAK=5936 |
| WSQUOTA=11872 WSSIZE=5936 |
| CPULIM=0 MAXDETACH=100 |
| MAXJOBS=0 JOBPRCCNT=1 |
| PAGEFLTS=10529 PRCCNT=0/50(0%) + |
| (*) - % resource remaining, (+) - % resource used |
| |
| Privilege and rights information: |
| ================================= |
| CURPRIV=altpri cmkrnl detach exquota group grpnam grpprv log_io netmbx |
| oper pfnmap prmgbl prmmbx readall share shmem sysgbl |
| syslck sysnam sysprv tmpmbx world |
| IMAGPRIV=detach prmgbl sysgbl sysprv world |
| AUTHPRIV=altpri cmkrnl detach exquota group grpnam grpprv log_io netmbx |
| oper pfnmap prmgbl prmmbx readall share shmem sysgbl |
| syslck sysnam tmpmbx world |
| DMG_TPDEV INTERACTI |
| REMOTE TELNET |
| LGI_SUBNET_BL FTP_PRIV_ACCESS |
| GIFTS_DMGTP_PRO PSS_LOGIN_HBDMGD |
| PSS_LOGIN_NYGFTD SWIFT |
| MQM SYS |
| IMAGE_RIGHTS= |
| SYS$NODE_HBDMGD |
| |
| SYI information: |
| ================ |
| ACTIVE CPU=4/4(100%) + CLUSTER NODES=6 |
| FREE_GBLPAGES=12292080/12775823(96%) * GBLPAGFIL=787000 |
| FREE_GBLSECTS=1164/2048(56%) * MEMSIZE=262144 |
| PAGEFILE_FREE=124992/124992(100%) * PAGE_SIZE=8192 |
| SWAPFILE_FREE=0() MAXPROCESSCNT=692 |
| PROCSECTCNT=128 BALSETCNT=690 |
| WSMAX=786432 NPAGEDYN=49995776 |
| NPAGEVIR=249995264 PAGEDYN=19996672 |
| VIRTUALPAGECNT=2147483647 LOCKIDTBL_MAX=2049164 |
| PQL_DASTLM=24 PQL_MASTLM=500 |
| PQL_DBIOLM=32 PQL_MBIOLM=100 |
| PQL_DBYTLM=65536 PQL_MBYTLM=100000 |
| PQL_DCPULM=0 PQL_MCPULM=0 |
| PQL_DDIOLM=32 PQL_MDIOLM=100 |
| PQL_DFILLM=128 PQL_MFILLM=100 |
| PQL_DPGFLQUOTA=65536 PQL_MPGFLQUOTA=1000000 |
| PQL_DPRCLM=32 PQL_MPRCLM=10 |
| PQL_DTQELM=16 PQL_MTQELM=1000 |
| PQL_DWSDEFAULT=5936 PQL_MWSDEFAULT=5936 |
| PQL_DWSQUOTA=11872 PQL_MWSQUOTA=11872 |
| PQL_DWSEXTENT=786432 PQL_MWSEXTENT=786432 |
| PQL_DENQLM=128 PQL_MENQLM=300 |
| PQL_DJTQUOTA=4096 PQL_MJTQUOTA=0 |
| CLISYMTBL=750 DEFMBXMXMSG=512 |
| DEFMBXBUFQUO=8192 CHANNELCNT=2047 |
| DLCKEXTRASTK=2560 PIOPAGES=1075 |
| CTLPAGES=256 CTLIMGLIM=35 |
| (*) - % resource remaining, (+) - % resource used |
| |
+-----------------------------------------------------------------------------+
MQM Function Stack
mqscMAIN
uscRunScript
uscRunCommand
uscRunIT
pcmStopChannel
rrxStopChannel
rriChannelTerminate
xcsFFST
MQM Trace History
--------{ xcsQueryValueForSubpool
--------} xcsQueryValueForSubpool rc=OK
----
----
----
----
Warning : Channel Process Termination Detected
141E8B0 52535445 04000000 01000000 RSTE........
141E8C0 00000000 12C26045 00000000 2490E200 .....B`E....$b.
141E8D0 7D000100 02000100 02000000 4D514841 }...........MQHA
141E8E0 5F545354 2E544F2E 5357465F 54535420 _TST.TO.SWF_TST
141E8F0 05010200 31302E31 35392E32 30362E31 ....10.159.206.1
141E900 32362020 20202020 20202020 20202020 26
141E910 20202020 20202020 20202020 20202020
141E920 to 141E9E0 suppressed, 13 lines same as above
141E9F0 20202020 20202020 20202020 32000000 2...
141EA00 2C010000 02000000 3C000000 B0040000 ,.......<...0...
141EA10 4D514841 5F545354 20202020 20202020 MQHA_TST
Last edited by kats on Thu Dec 14, 2006 8:24 am; edited 1 time in total |
|
| Back to top |
|
|
| kevinf2349 |
| Posted: Wed Dec 13, 2006 2:13 pm Post subject: |
|
|
Grand Master
Joined: 28 Feb 2003
Posts: 1311
Location: USA
|
I thought you said this was 5.3 CSD10?
This FDC says it is CSD06 doesn't it? (Or am I missing somthing here?)
| Code: |
| LVLS :- 530.6 CSD06 |
| Product Long Name :- WebSphere MQ for OpenVMS Alpha |
|
|
|
| Back to top |
|
|
| kats |
| Posted: Wed Dec 13, 2006 2:16 pm Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Nice catch.
VMS administrator told me that CSD10 is applied and I took the words.
I am not a VMS admin but guess I should have looked that in more details. Thanks. |
|
| Back to top |
|
|
| kats |
| Posted: Thu Dec 14, 2006 8:34 am Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Sir(s),
Could you please tell me: On FFST
| Date/Time :- Sunday November 19 15:48:37 EST 2006 |
and
| Build Date :- Jan 12 2005 |
Why Date/Time and Build date signify?? |
|
| Back to top |
|
|
| jefflowrey |
| Posted: Thu Dec 14, 2006 11:17 am Post subject: |
|
|
Grand Poobah
Joined: 16 Oct 2002
Posts: 19981
|
Build Date is when the MQ code was compiled.
_________________
I am *not* the model of the modern major general. |
|
| Back to top |
|
|
| kats |
| Posted: Thu Dec 14, 2006 11:59 am Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Thanks Jeff. I thought so too, but wanted to double check.
Anyway, i am posting latest FFST(Not full) from Server A VMS
I tried to google Probe Id :- XY136007; No luck even this time.
Can anyone pick some clue 
$ type AMQ28C004D0_0.FDC;1
+-----------------------------------------------------------------------------+
| |
| WebSphere MQ First Failure Symptom Report |
| ========================================= |
| |
| Date/Time :- Monday December 11 21:36:28 EST 2006 |
| Host Name :- HBDMGD (OpenVMS V7.3-2) |
| PIDS :- 5697175 |
| LVLS :- 530.10 CSD10 |
| Product Long Name :- WebSphere MQ for OpenVMS Alpha |
| Vendor :- IBM |
| Probe Id :- XY136007 |
| Application Name :- MQM |
| Component :- xstCreateExtentFile |
| Build Date :- Jul 3 2006 |
| CMVC level :- p530-10-L040211 |
| Build Type :- IKAP - (Production) |
| Userid :- [400,400] (MQM) |
| Program Name :- AMQCRSTA.EXE |
| Process :- 28C004D0 |
| Thread :- 00000001 |
| Major Errorcode :- OK |
| Minor Errorcode :- OK |
| Probe Type :- INCORROUT |
| Probe Severity :- 4 |
| Probe Description :- AMQ6125: An internal WebSphere MQ error has occurred. |
| FDCSequenceNumber :- 0 |
| Arith2 :- 13 d |
| Comment1 :- Failed to delete file |
| /mqs_root/mqm/qmgrs/@SYSTEM/shmem/shm.0 i |
| VMS Errorcode :- -RMS-E-PRV, insufficient privilege or file protection |
| violation (0001829A) |
| |
| JPI Quota information: |
| ====================== |
| ASTCNT=498/500(99%) * BIOCNT=600/600(100%) * |
| BYTCNT=698784/698784(100%) * DIOCNT=600/600(100%) * |
| ENQCNT=4994/5000(99%) * FILCNT=246/250(98%) * |
| PAGFILCNT=990160/1000000(99%) * TQCNT=999/1000(99%) * |
| FREPTECNT=2147483647 APTCNT=0 |
| GPGCNT=4064 PPGCNT=5120 |
| VIRTPEAK=184304 DFWSCNT=5936 |
| WSAUTH=11872 WSAUTHEXT=786432 |
| WSEXTENT=786432 WSPEAK=9184 |
| WSQUOTA=11872 WSSIZE=13136 |
| CPULIM=360000 MAXDETACH=0 |
| MAXJOBS=1 JOBPRCCNT=0 |
| PAGEFLTS=529 PRCCNT=0/100(0%) + |
| (*) - % resource remaining, (+) - % resource used |
| |
| Privilege and rights information: |
| ================================= |
| CURPRIV=bugchk netmbx prmgbl setprv sysgbl tmpmbx world |
| IMAGPRIV=bugchk prmgbl setprv sysgbl world |
| AUTHPRIV=netmbx tmpmbx |
| MQS_SERVER NETWORK |
| SYS$NOD |
| IMAGE_RIGHTS= |
| SYS$NODE_HBDMGD |
| |
| SYI information: |
| ================ |
| ACTIVE CPU=4/4(100%) + CLUSTER NODES=7 |
| FREE_GBLPAGES=12407680/12775823(97%) * GBLPAGFIL=787000 |
| FREE_GBLSECTS=1191/2048(58%) * MEMSIZE=262144 |
| PAGEFILE_FREE=124992/124992(100%) * PAGE_SIZE=8192 |
| SWAPFILE_FREE=0() MAXPROCESSCNT=692 |
| PROCSECTCNT=128 BALSETCNT=690 |
| WSMAX=786432 NPAGEDYN=49995776 |
| NPAGEVIR=249995264 PAGEDYN=19996672 |
| VIRTUALPAGECNT=2147483647 LOCKIDTBL_MAX=2049164 |
| PQL_DASTLM=24 PQL_MASTLM=500 |
| PQL_DBIOLM=32 PQL_MBIOLM=100 |
| PQL_DBYTLM=65536 PQL_MBYTLM=100000 |
| PQL_DCPULM=0 PQL_MCPULM=0 |
| PQL_DDIOLM=32 PQL_MDIOLM=100 |
| PQL_DFILLM=128 PQL_MFILLM=100 |
| PQL_DPGFLQUOTA=65536 PQL_MPGFLQUOTA=1000000 |
| PQL_DPRCLM=32 PQL_MPRCLM=10 |
| PQL_DTQELM=16 PQL_MTQELM=1000 |
| PQL_DWSDEFAULT=5936 PQL_MWSDEFAULT=5936 |
| PQL_DWSQUOTA=11872 PQL_MWSQUOTA=11872 |
| PQL_DWSEXTENT=786432 PQL_MWSEXTENT=786432 |
| PQL_DENQLM=128 PQL_MENQLM=300 |
| PQL_DJTQUOTA=4096 PQL_MJTQUOTA=0 |
| CLISYMTBL=750 DEFMBXMXMSG=512 |
| DEFMBXBUFQUO=8192 CHANNELCNT=2047 |
| DLCKEXTRASTK=2560 PIOPAGES=1075 |
| CTLPAGES=256 CTLIMGLIM=35 |
| (*) - % resource remaining, (+) - % resource used |
| |
+-----------------------------------------------------------------------------+
MQM Function Stack
xcsCreateSharedMemSet
xstCreateExtent
xstCreateExtentFile
xcsFFST
MQM Trace History
{ xppInitialiseDestructorRegistrations
Component Dumps (Thread 00000001)
------------------------------------- |
|
| Back to top |
|
|
| ravindra |
| Posted: Fri Dec 15, 2006 1:25 am Post subject: To start listener automatically |
|
|
Newbie
Joined: 16 Mar 2006
Posts: 1
|
Hi,
I want start listener automatically in websphere MQ 6.0. for that canu any give tips.
Can we start listener automatically in WebSphere MQ 5.3.
Thnx,
Ravindra. |
|
| Back to top |
|
|
| Vitor |
| Posted: Fri Dec 15, 2006 1:31 am Post subject: Re: To start listener automatically |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| ravindra wrote: |
Hi,
I want start listener automatically in websphere MQ 6.0. for that canu any give tips.
Can we start listener automatically in WebSphere MQ 5.3.
Thnx,
Ravindra. |
Does this have anything to do with this thread?
In both cases the answer is yes. Check the documentation for your platform for details (it varies).
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| harwinderr |
| Posted: Mon Dec 18, 2006 1:01 am Post subject: |
|
|
Voyager
Joined: 29 Jan 2002
Posts: 90
|
Hi Kats,
To migrate from MQ51 to WMQ53 for OpenVMS, you need to be at a minimum level of MQ5.1 CSD04.
If you are not at MQ51 CSD04 level, you will need to recreate your queue manager once you install WMQ53. You can take the help of support packs like ms03 to take a backup of your mq objects first.
Thanks,
HR |
|
| Back to top |
|
|
| kats |
| Posted: Tue Dec 19, 2006 7:32 am Post subject: |
|
|
Voyager
Joined: 20 Apr 2006
Posts: 78
|
Thanks Harry,
That was nice hint. We'll try that.
Thanks again. |
|
| Back to top |
|
|
|
|
