| Author |
Message
|
| sudeepd2005 |
 Posted: Mon Sep 08, 2014 9:10 am Post subject: Not able to set mqsiprofile |
 |
|
Novice
Joined: 28 Oct 2013
Posts: 22
|
Hi,
I am getting following issue while setting up mqsiprofile.
First attemp -
/opt/IBM/mqsi/7.0/bin>. mqsiprofile
ksh: MIBDIRS: 0403-041 Parameter not set.
/opt/IBM/mqsi/7.0/bin>mqsilist
The user environment was not adequately prepared to continue execution. Locate and run the profile supplied with the product. This file is called mqsiprofile, and is located in the bin subdirectory for the product.
Second attempt -
/opt/IBM/mqsi/7.0/bin>. mqsiprofile
mqsiprofile repetition disallowed
/opt/IBM/mqsi/7.0/bin>mqsilist
The user environment was not adequately prepared to continue execution. Locate and run the profile supplied with the product. This file is called mqsiprofile, and is located in the bin subdirectory for the product.
Please suggest! |
|
| Back to top |
|
 |
| Vitor |
| Posted: Mon Sep 08, 2014 9:29 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
What OS?
Have you modified the mqsiprofile from the IBM supplied standard?
Has this ever worked or is this a new installation?
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| smdavies99 |
| Posted: Mon Sep 08, 2014 10:46 am Post subject: |
|
|
Jedi Council
Joined: 10 Feb 2003
Posts: 6076
Location: Somewhere over the Rainbow this side of Never-never land.
|
Shouldn't the profile be 'sourced' by
_________________
WMQ User since 1999
MQSI/WBI/WMB/'Thingy' User since 2002
Linux user since 1995
Every time you reinvent the wheel the more square it gets (anon). If in doubt think and investigate before you ask silly questions. |
|
| Back to top |
|
|
| sudeepd2005 |
| Posted: Tue Sep 09, 2014 7:38 am Post subject: |
|
|
Novice
Joined: 28 Oct 2013
Posts: 22
|
Thanks for the reply!
The OS is AIX 6. It was working fine when I used last time. I am sure no changes have been made in it after that.
I have tried . ./mqsiprofile as well , same result :
/opt/IBM/mqsi/7.0/bin>. ./mqsiprofile
mqsiprofile repetition disallowed |
|
| Back to top |
|
|
| smdavies99 |
| Posted: Tue Sep 09, 2014 7:54 am Post subject: |
|
|
Jedi Council
Joined: 10 Feb 2003
Posts: 6076
Location: Somewhere over the Rainbow this side of Never-never land.
|
| sudeepd2005 wrote: |
/opt/IBM/mqsi/7.0/bin>. ./mqsiprofile
mqsiprofile repetition disallowed |
Dosen't mqsiprofile repetition disallowed tell you something?
_________________
WMQ User since 1999
MQSI/WBI/WMB/'Thingy' User since 2002
Linux user since 1995
Every time you reinvent the wheel the more square it gets (anon). If in doubt think and investigate before you ask silly questions. |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Sep 09, 2014 7:56 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
Ok, so the only real issue is the bit about
| Quote: |
| ksh: MIBDIRS: 0403-041 Parameter not set. |
and that's coming from ksh, not really from mqsiprofile.
It sounds like you should maybe log out and log back in, and then see if you can source the mqsiprofile the first time without errors. |
|
| Back to top |
|
|
| sudeepd2005 |
| Posted: Tue Sep 09, 2014 8:53 am Post subject: |
|
|
Novice
Joined: 28 Oct 2013
Posts: 22
|
Even after logging out and making a first attempt to set mqsiprofile i get below issue, which i have stated earlier -
/opt/IBM/mqsi/7.0/bin>. mqsiprofile
ksh: MIBDIRS: 0403-041 Parameter not set.
On the second attempt that repetition stuff displays. |
|
| Back to top |
|
|
| Vitor |
| Posted: Tue Sep 09, 2014 9:01 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| sudeepd2005 wrote: |
/opt/IBM/mqsi/7.0/bin>. mqsiprofile
ksh: MIBDIRS: 0403-041 Parameter not set. |
Which, as my most worthy associate points out, is an error from ksh not from mqsiprofile.
Typically it means that ksh thinks a string literal in a command string is a parameter. Ask Mr Google about an 0403-041 error from ksh. Also ask whoever installed AIX if they've "improved" the settings of the Korn shell by changing any of the defaults.......
| sudeepd2005 wrote: |
| On the second attempt that repetition stuff displays. |
As it should. We can assume mqsiprofile set the "I've been run" switch before it failed.
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
| smdavies99 |
| Posted: Tue Sep 09, 2014 9:21 am Post subject: |
|
|
Jedi Council
Joined: 10 Feb 2003
Posts: 6076
Location: Somewhere over the Rainbow this side of Never-never land.
|
MIBDIRS sounds like something to do with SNMP.
_________________
WMQ User since 1999
MQSI/WBI/WMB/'Thingy' User since 2002
Linux user since 1995
Every time you reinvent the wheel the more square it gets (anon). If in doubt think and investigate before you ask silly questions. |
|
| Back to top |
|
|
| sudeepd2005 |
| Posted: Tue Sep 09, 2014 12:12 pm Post subject: |
|
|
Novice
Joined: 28 Oct 2013
Posts: 22
|
Folks,
Not getting much help from google. What you suggest ?
Just for the info MQ 9 was also installed on same server recently. Is there any chance it has impacted ? |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Tue Sep 09, 2014 12:24 pm Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20703
Location: LI,NY
|
For your mqsi profile you need to make sure you reference the MQ7 environment. See on how to set up the production /test environment by reading up in the infocenter 
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| sudeepd2005 |
| Posted: Wed Sep 10, 2014 12:39 am Post subject: |
|
|
Novice
Joined: 28 Oct 2013
Posts: 22
|
its a QA env where issue is happening.Below excerpt is from mqsiprofile -
MIBDIRS=${MQSI_FILEPATH}/snmp-mib:${MIBDIRS}
where -
PROSPECTIVE_MQSI_FILEPATH=/opt/IBM/mqsi/7.0
MQSI_FILEPATH=${PROSPECTIVE_MQSI_FILEPATH} |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Wed Sep 10, 2014 3:51 am Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20703
Location: LI,NY
|
| sudeepd2005 wrote: |
its a QA env where issue is happening.Below excerpt is from mqsiprofile -
MIBDIRS=${MQSI_FILEPATH}/snmp-mib:${MIBDIRS}
where -
PROSPECTIVE_MQSI_FILEPATH=/opt/IBM/mqsi/7.0
MQSI_FILEPATH=${PROSPECTIVE_MQSI_FILEPATH} |
Does this path exist? ${MQSI_FILEPATH}/snmp-mib ?
maybe you'd have to create it?
This does not sound like a standard set up in mqsiprofile...
Did somebody change it? Is it part of the runtime environment set up (plug in to mqsiprofile)? may be you should check that the path exists before trying to set it in the variable...
Have fun
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| Vitor |
| Posted: Wed Sep 10, 2014 4:59 am Post subject: |
|
|
Grand High Poobah
Joined: 11 Nov 2005
Posts: 26093
Location: Texas, USA
|
| fjb_saper wrote: |
| This does not sound like a standard set up in mqsiprofile... |
It's bad practice to change the supplied mqsiprofile - makes maintenance trickier. Change the .profile instead.
I also agree this looks like a simple script bug. Or at least a script bug. 
_________________
Honesty is the best policy.
Insanity is the best defence. |
|
| Back to top |
|
|
|
|
