| Author |
Message
|
| gag_nm |
 Posted: Sun Nov 24, 2013 8:32 pm Post subject: BIP1047E:Unable to Delete execution group in V8.0.0.3 |
 |
|
Centurion
Joined: 16 Oct 2008
Posts: 102
|
Hi,
we are using Message broker v8.0.0.3 on AIX 6.1.
while trying to delete execution group we are receiving below error.how we can solve this issue...in WMB 8.0.03.
| Code: |
bash-3.2$ mqsideleteexecutiongroup NBAX011U -e AService
BIP1127I: This command will implicitly remove the following resource(s): EnquiryMsgFlwPrj.appzip, PaymentMsgFlwPrj.appzip, PopupMsgFlwPrj.appzip, ValidationMsgFlwPrj.appzip, SimulatorFlw.appzip, PAYMsgFlwPrj.appzip.
BIP1130I: Deleting the execution group from broker 'NBAX011U'...
BIP1047E: The operation timed out waiting for a response.
The utility did not receive an expected response from the broker within a designated amount of time.
The operation might have completed successfully, even though the response was not received.
Ensure that the broker is running and that the correct connection parameters have been supplied to the utility.
Use the -w flag to increase the amount of time to wait for responses. |
i have restarted the Broker and tried Mqsideleteexecutiongroup command , but same error as occurred. |
|
| Back to top |
|
 |
| Simbu |
| Posted: Sun Nov 24, 2013 9:34 pm Post subject: |
|
|
Master
Joined: 17 Jun 2011
Posts: 289
Location: Tamil Nadu, India
|
| Quote: |
| Use the -w flag to increase the amount of time to wait for responses |
Also ensure that your flows in the EG are not busy in processing the message. |
|
| Back to top |
|
|
| gag_nm |
| Posted: Sun Nov 24, 2013 9:42 pm Post subject: |
|
|
Centurion
Joined: 16 Oct 2008
Posts: 102
|
| Code: |
bash-3.2$ mqsideleteexecutiongroup NBAX011U -e AService -w 500
BIP1127I: This command will implicitly remove the following resource(s): EnquiryMsgFlwPrj.appzip, PaymentMsgFlwPrj.appzip, PopupMsgFlwPrj.appzip, ValidationMsgFlwPrj.appzip, SimulatorFlw.appzip, PAYMsgFlwPrj.appzip
BIP1130I: Deleting the execution group from broker 'NBAX011U'...
BIP1129E: The execution group could not be deleted.
The utility was asked to delete execution group 'AService' on broker 'NBAX011U', but it was not completed successfully.
Determine the cause of the problem by reviewing the following error messages. If the problem persists, contact your IBM support representative.
BIP2871I: The request made by user 'broker' to 'delete' the resource 'AService ' of type 'ExecutionGroup' on parent 'NBAX011U' of type 'Broker' has the status of 'TIMED-OUT'. |
i have tried even by increasing time with -w option |
|
| Back to top |
|
|
| smdavies99 |
| Posted: Sun Nov 24, 2013 11:58 pm Post subject: |
|
|
Jedi Council
Joined: 10 Feb 2003
Posts: 6076
Location: Somewhere over the Rainbow this side of Never-never land.
|
Have you tried the fairly obvious ...
stopping the EG before deleting it?
even an 'mqsireload' on it may help.
does it happen if you create a test broker and after deploying a few things to it, you try to delete the EG?
Failing that you need to read the 'must gather' docs on the IBM site and submit a PMR
_________________
WMQ User since 1999
MQSI/WBI/WMB/'Thingy' User since 2002
Linux user since 1995
Every time you reinvent the wheel the more square it gets (anon). If in doubt think and investigate before you ask silly questions. |
|
| Back to top |
|
|
| stoney |
| Posted: Mon Nov 25, 2013 1:37 am Post subject: |
|
|
Centurion
Joined: 03 Apr 2013
Posts: 140
|
| Have you looked at the syslog to see if the execution group is generating any warnings or error messages that might point to the cause of the problem? |
|
| Back to top |
|
|
| gag_nm |
| Posted: Mon Nov 25, 2013 9:43 pm Post subject: |
|
|
Centurion
Joined: 16 Oct 2008
Posts: 102
|
below is the message generated on syslog
| Code: |
WebSphere Broker v8003[13303956]: (NBAX011U.0b2f168e-4201-0000-0080-fd67787cc5e6)[4371]BIP2228E: Severe error: /build/slot1/S800_P/src/CommonServices/Unix/ImbAbend.cpp 1060 signal received Abend file: /var/mqsi/common/errors/NBAX011U.0b2f168e-4201-0000-0080-fd67787cc5e6.13303956.4371.abend action: abort
BIP2066E: Broker 'NBAX011U' was unable to retrieve an internal configuration response message for execution group 'AService' within the '360' second configuration timeout. : NBAX011U.agent: /build/slot1/S800_P/src/AdminAgent/ImbAdminAgent.cpp: 3590: ImbAdminAgent::receiveEGResponse: :
|
please find below content of error file(NBAX011U.0b2f168e-4201-0000-0080-fd67787cc5e6.13303956.4371.abend) under /var/mqsi/common/errors/
| Code: |
+-----------------------------------------------------------------------------+
| |
| |
| First Failure Symptom Report |
| ======================== |
| |
| Proc start time (GMT) :- Mon Nov 25 13:30:32 2013 |
| |
| Product Details |
| +++++++++++++++ |
| |
| Vendor :- IBM |
| Product Name :- WebSphere Message Broker |
| Program ID :- 5724-J05 |
| Version :- 8003 |
| |
| OS Information |
| ++++++++++++++ |
| |
| Operating System :- AIX |
| Version :- 6 |
| Release :- 1 |
| Node Name :- devbrk |
| Machine ID :- 00C133F54C00 |
| |
| Environment |
| +++++++++++ |
| |
| Installation Path :- /opt/IBM/mqsi/8.0.0.3 |
| Service User ID :- broker |
| Work Path :- /var/mqsi |
| Executable Name :- DataFlowEngine |
| Process ID :- 8716504 |
| |
| Deployment |
| ++++++++++ |
| |
| Component Name :- NBAX011U |
| Component UUID :- af052ee2-4056-11e3-a4c1-ac140c430000 |
| Queue Manager :- BRXDEV_D01 |
| DB User ID :- broker |
| Execution Group :- AService |
| EG UUID :- 82386f0d-4201-0000-0080-bbbe8c1a3c18 |
| User trace :- 0 |
| Service trace :- 0 |
| Trace size :- 0 |
| |
| Build Information |
| +++++++++++++++++ |
| |
| Backing build :- |
| Sandbox :- /build/slot1/S800_P |
| CMVC Level :- S800-FP03 |
| Build type :- Production |
| Build context :- rios_aix_4 |
| 64 Bit Build :- yes |
| |
| Failure Location |
| ++++++++++++++++ |
| |
| Time of Report (GMT) :- secs since 1/1/1970: 1385371840 |
| Message Flow :- Configuration |
| Thread ID :- 0x0000000000001113 |
| |
+-----------------------------------------------------------------------------+
abend record for pid 8716504 tid 4371 time in seconds since 01/01/1970: 1385371840
File: /build/slot1/S800_P/src/CommonServices/Unix/ImbAbend.cpp
Line: 1060
Function: signal received
---- Inserts ----
4
@(#) MQMBID sn=S800-FP03 su=_5tuogCkpEeOhl5L7L4IsoQ pn=CommonServices/Unix/ImbAbend.cpp]
391009936
-----------------
----------------------------- Stack dump for current thread ( 4371)
(0x174e5710+??????] <no name available> []
(0x1ab22880+0x000003e8) generateRuntimeObjects__18SqlUpdateStatementFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ab43f00+0x000000d0) generateRuntimeObjects__27SqlRuntimeStatementDatabaseFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1a714b00+0x0000006c) callGenerateRuntimeObjs__12SqlStatementFRP12SqlStatementR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1a71a080+0x00000178) generateRuntimeObjects__17SqlStatementGroupFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ab82b80+0x00000088) clearRuntimeObjects__21SqlWhileStatementBaseFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1a719c80+0x00000030) callClearRuntimeObjs__12SqlStatementFRP12SqlStatementR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1a718d00+0x00000148) clearRuntimeObjects__17SqlStatementGroupFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ab73680+0x00000030) callClearRuntimeObjs__12SqlStatementFRQ2_3std8auto_ptrXT12SqlStatement_R15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ac78480+0x00000458) clearRuntimeObjects__10SqlRoutineFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ac84300+0x000000e0) clearRuntimeObjects__15SqlSchemaModuleFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ac92500+0x00000020) clearRuntimeObjects__9SqlModuleFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1aca2400+0x0000023c) clearRuntimeObjects__9SqlSchemaFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ad19600+0x00000060) clearRuntimeObjects__12SqlInterfaceFR15SqlSetupEnviron [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ad41200+0x000000cc) clearRuntimeObjects__19SqlComputeInterfaceFv [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1ad41000+0x0000006c) __dt__19SqlComputeInterfaceFv [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x1acbe380+0x000000b8) __dt__14ImbESQLSessionFv [/opt/IBM/mqsi/8.0.0.3/lib/libImbRdl.a(libImbRdl.a.so)]
(0x20145e00+0x00000090) __dt__14ImbComputeNodeFv [/opt/IBM/mqsi/8.0.0.3/lil/imbdfsql.lil]
(0x1783d700+0x00000200) __dt__18ImbDataFlowManagerFv [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17905200+0x000007c4) deleteDataFlowResource__24ImbDeployedResourceGroupFRQ3_3std5_TreeXTQ2_3std12_Tmap_traitsXT10ImbWstringTP18ImbDataFlowManagerTQ2_3std4lessXT10ImbWstring_TQ2_3std9allocatorXTQ2_3std4pairXTC10ImbWstringTP18ImbDataFlowManager__SP0__8iteratorRQ2_10ImbMessage11WriteCursorbN23 [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17904700+0x00000224) deleteAllDataFlowsResource__24ImbDeployedResourceGroupFRQ2_10ImbMessage11WriteCursorbT2 [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17902880+0x000004fc) deleteResource__24ImbDeployedResourceGroupFRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursor [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17994080+0x00000428) deleteResource__22ImbDataFlowApplicationFRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursor [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17a38f00+0x000007f0) deleteApplicationResource__25ImbExecutionGroupDirectorFRQ3_3std5_TreeXTQ2_3std12_Tmap_traitsXT10ImbWstringTP22ImbDataFlowApplicationTQ2_3std4lessXT10ImbWstring_TQ2_3std9allocatorXTQ2_3std4pairXTC10ImbWstringTP22ImbDataFlowApplication__SP0__8iteratorRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursorbT4 [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17a38300+0x00000238) deleteAllApplicationsResource__25ImbExecutionGroupDirectorFRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursorb [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17a36000+0x000003f0) deleteResource__25ImbExecutionGroupDirectorFRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursor [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x1d93c580+0x000010fc) processExecutionGroupRequest__20ImbConfigurationNodeFP24ImbDataFlowNotificationsRC10ImbWstringRQ2_20ImbConfigurationNode11TransactionRCQ2_10ImbMessage10ReadCursorRQ2_10ImbMessage11WriteCursor [/opt/IBM/mqsi/8.0.0.3/lil/imbdfcfg.lil]
(0x1d942a80+0x00001414) evaluate__20ImbConfigurationNodeFRC18ImbMessageAssemblyPC19ImbDataFlowTerminal [/opt/IBM/mqsi/8.0.0.3/lil/imbdfcfg.lil]
(0x175ebd80+0x000001b0) evaluate__19ImbDataFlowTerminalFRC18ImbMessageAssembly [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x175e3c00+0x00000188) propagateInner__19ImbDataFlowTerminalFRC18ImbMessageAssemblyP19ImbDataFlowTerminal [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x17aec180+0x00000108) propagate__19ImbDataFlowTerminalFRC18ImbMessageAssembly [/opt/IBM/mqsi/8.0.0.3/lib/libMessageServices.a(libMessageServices.a.so)]
(0x1b2b3200+0x0000369c) run__18ImbCommonInputNodeFP11ImbOsThread [/opt/IBM/mqsi/8.0.0.3/lib/libMQLibrary.a(libMQLibrary.a.so)]
(0x1b2d1200+0x00000038) run__Q2_18ImbCommonInputNode10ParametersFP11ImbOsThread [/opt/IBM/mqsi/8.0.0.3/lib/libMQLibrary.a(libMQLibrary.a.so)]
(0x16e83600+0x00000090) run__27ImbThreadPoolThreadFunctionFP11ImbOsThread [/opt/IBM/mqsi/8.0.0.3/lib/libCommonServices.a(libCommonServices.a.so)]
(0x16e81280+0x000000b0) threadRun__11ImbOsThreadFv [/opt/IBM/mqsi/8.0.0.3/lib/libCommonServices.a(libCommonServices.a.so)]
(0x16e80680+0x000000e0) threadBootStrap__11ImbOsThreadFPv [/opt/IBM/mqsi/8.0.0.3/lib/libCommonServices.a(libCommonServices.a.so)]
(0x007d4c40+0x000000f4) _pthread_body [/usr/lib/libpthreads.a(shr_xpg5_64.o)]
(0x00000000) <invalid code address>
----------------------------------------------------------------------
Process Environment Variables
*****************************
AIXTHREAD_MNRATIO=1:1
AIXTHREAD_SCOPE=S
AUTHSTATE=compat
CLASSPATH=/usr/mqm/java/lib/com.ibm.mqjms.jar:/usr/mqm/java/lib/connector.jar:/usr/mqm/java/lib/com.ibm.mq.pcf.jar:/usr/mqm/java/lib/com.ibm.mq.jmqi.jar:/usr/mqm/java/lib/com.ibm.mq.jar:/usr/mqm/java/lib/com.ibm.mq.headers.jar:/usr/mqm/java/lib/com.ibm.mq.commonservices.jar:/usr/mqm/java/lib/com.ibm.mq.jms.Nojndi.jar:/opt/IBM/mqsi/8.0.0.3/messages:/opt/IBM/mqsi/8.0.0.3/classes:/opt/IBM/mqsi/8.0.0.3/classes/ConfigManagerProxy.jar:/opt/IBM/mqsi/8.0.0.3/classes/brokerutil.jar:/usr/mqm/java/lib/com.ibm.mq.jar:/usr/mqm/java/lib/com.ibm.mqjms.jar:/usr/mqm/samp/wmqjava/samples:/usr/mqm/samp/jms/samples:/var/mqsi/common/wsrr
CLCMD_PASSTHRU=1
ERRNO=25
EXTSHM=ON
FCEDIT=/usr/bin/ed
HOME=/home/broker
IBM_COREDIR=/var/mqsi/common/errors
IBM_HEAPDUMPDIR=/var/mqsi/common/errors
IBM_JAVACOREDIR=/var/mqsi/common/errors
ICU_DATA=/opt/IBM/mqsi/8.0.0.3/xml4c/data
IE02_PATH=/opt/ibm/IE02/2.0.0
IFS='
'
LANG=en_US
LC__FASTMSG=true
LIBPATH=/usr/mqm/java/lib64:/usr/mqm/lib64/compat:/opt/IBM/mqsi/8.0.0.3/jre16/lib/ppc64:/opt/IBM/mqsi/8.0.0.3/jre16/lib/ppc64/classic:/opt/ibm/IE02/2.0.0/lib:/opt/IBM/mqsi/8.0.0.3/xml4c/lib:/opt/IBM/mqsi/8.0.0.3/lib:/opt/IBM/mqsi/8.0.0.3/bin:/opt/IBM/mqsi/8.0.0.3/ODBC/V6.0/lib:/opt/IBM/mqsi/8.0.0.3/xlxpc/lib:/opt/IBM/mqsi/8.0.0.3/dfdlc/lib:/opt/IBM/mqsi/8.0.0.3/ODBC/V7.0/lib:/usr/lib
LINENO=1
LOCPATH=/usr/lib/nls/loc
LOGIN=broker
LOGNAME=broker
MAIL=/usr/spool/mail/broker
MAILCHECK=600
MAILMSG='[YOU HAVE NEW MAIL]'
MALLOCOPTIONS=pool,buckets,bucket_sizing_factor:16,multiheap:8,considersize
MANPATH=/usr/mqm/man:/usr/share/man
MIBDIRS=/opt/IBM/mqsi/8.0.0.3/snmp-mib
MQSI_CATALINA_HOME=/opt/IBM/mqsi/8.0.0.3/catalina
MQSI_EXMLTCONFIGPATH=/opt/IBM/mqsi/8.0.0.3/exmltConfig
MQSI_FAD=6
MQSI_FILEPATH=/opt/IBM/mqsi/8.0.0.3
MQSI_JARPATH=/opt/IBM/mqsi/8.0.0.3/classes:/opt/IBM/mqsi/8.0.0.3/messages
MQSI_JREPATH=/opt/IBM/mqsi/8.0.0.3/jre16
MQSI_LILPATH=/opt/IBM/mqsi/8.0.0.3/lil:/opt/IBM/mqsi/8.0.0.3/jplugin
MQSI_PROCESSOR_ARCHITECTURE=64
MQSI_REGISTRY=/var/mqsi
MQSI_SECURITY_PROVIDER_PATH=/opt/IBM/mqsi/8.0.0.3/SecurityProviders
MQSI_VERSION=8.0.0.3
MQSI_VERSION_F=3
MQSI_VERSION_M=0
MQSI_VERSION_R=0
MQSI_VERSION_V=8
MQSI_WEBADMIN_HOME=/opt/IBM/mqsi/8.0.0.3/webadmin
MQSI_WORKPATH=/var/mqsi
MQS_APPL_HANDLE_SIGNALS=1
MQS_NO_SYNC_SIGNAL_HANDLING=1
MQ_DATA_PATH=/var/mqm
MQ_ENV_MODE=64
MQ_INSTALLATION_NAME=Installation1
MQ_INSTALLATION_PATH=/usr/mqm
MQ_JAVA_DATA_PATH=/var/mqm
MQ_JAVA_INSTALL_PATH=/usr/mqm/java
MQ_JAVA_LIB_PATH=/usr/mqm/java/lib64
MQ_JRE_PATH=/usr/mqm/java/jre64/jre
NLSPATH=/opt/IBM/mqsi/8.0.0.3/messages/%L/%N:/opt/IBM/mqsi/8.0.0.3/messages/En_US/%N:/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
ODBCINI=/var/mqsi/odbc/odbcV7.ini
ODBCINI32=/var/mqsi/odbc/odbc32.ini
ODBCSYSINI=/opt/ibm/IE02/2.0.0/etc
ODMDIR=/etc/objrepos
OPTIND=1
PATH=/opt/IBM/mqsi/8.0.0.3/jre16/bin:/opt/IBM/mqsi/8.0.0.3/bin:/opt/IBM/mqsi/8.0.0.3/isadc:/usr/mqm/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/broker/bin:/usr/bin/X11:/sbin:.
PPID=8716504
PROSPECTIVE_MQSI_FILEPATH=/opt/IBM/mqsi/8.0.0.3
PS2='> '
PS3='#? '
PS4='+ '
PWD=/var/mqsi
RANDOM=19873
SECONDS=0
SHELL=/usr/bin/ksh
SHLVL=1
SSH_CLIENT='178.40.12.49 1752 22'
SSH_CONNECTION='178.40.12.49 1752 178.40.12.67 22'
SSH_TTY=/dev/pts/3
TERM=xterm
TMOUT=0
TZ=Asia/Muscat
USER=broker
_=/opt/IBM/mqsi/8.0.0.3/bin/DataFlowEngine
--->------------------------------<ABEND FILE END>------------------------------<---
|
|
|
| Back to top |
|
|
| stoney |
| Posted: Tue Nov 26, 2013 12:51 am Post subject: |
|
|
Centurion
Joined: 03 Apr 2013
Posts: 140
|
| This needs to be investigated by IBM. You should raise a PMR. It may be that a fix already exists for this problem. |
|
| Back to top |
|
|
|
|
