| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
  |
|
| Sample MQ client SSL error |
« View previous topic :: View next topic » |
| Author |
Message
|
| pushsneha |
 Posted: Tue Nov 30, 2010 7:11 am Post subject: Sample MQ client SSL error |
 |
|
Newbie
Joined: 02 Nov 2010
Posts: 2
|
Hi,
I have modified the sample MQ Client amqsput0.c and compiled it on client machine using the below command on solaris machine
gcc -o amqsget0 amqsget0.c /opt/mqm/lib/libmqic.so
Tested successfully Non SSL connection.
Later enabled SSL and tested successfully with sample amqsgetc and amqsputc program.
But when I retested the amqsget0(which is my modified code) it failed with the below error:
AMQ9620: Internal error on call to SSL function on channel 'CLIENTCHL'.
EXPLANATION:
An error indicating a software problem was returned from a function which is
used to provide SSL support. The error code returned was '701'. The function
call was 'gsk_attribute_set_enum - GSK_USE_SOC_MUTEX'. The channel is
'CLIENTCHL'; in some cases its name cannot be determined and so is shown as
'????'. The channel did not start.
ACTION:
Collect the items listed in the 'Problem determination' section of the System
Administration manual and contact your IBM support center.
SSL is configured correctly as i have tested it with standard amqsputc and amqsgetc sample programs.
While compiling the sample program do we need to include something else or have i missed any steps??
Cheers,
Neha |
|
| Back to top |
|
 |
| pushsneha |
| Posted: Wed Dec 01, 2010 3:46 am Post subject: It was due to 64bit chain |
|
|
Newbie
Joined: 02 Nov 2010
Posts: 2
|
Hi,
I just found the solution for it.
the problem got resolved by compiling with the below command
gcc -m64 -o amqsget0 amqsget0.c /opt/mqm/lib64/libmqic.so
Cheers,
Neha |
|
| Back to top |
|
|
| RogerLacroix |
| Posted: Wed Dec 01, 2010 9:29 am Post subject: |
|
|
Jedi Knight
Joined: 15 May 2001
Posts: 3253
Location: London, ON Canada
|
Hi,
This causes your application to be build as a 32-bit MQ client application:
| Code: |
| gcc -o amqsget0 amqsget0.c /opt/mqm/lib/libmqic.so |
This causes your application to be build as a 64-bit MQ client application:
| Code: |
| gcc -m64 -o amqsget0 amqsget0.c /opt/mqm/lib64/libmqic.so |
Both should work with MQ & SSL, if not, then you should open a PMR with IBM.
Regards,
Roger Lacroix
_________________
Capitalware: Transforming tomorrow into today.
Connected to MQ!
Twitter |
|
| Back to top |
|
|
|
|
|
| |
|
Page 1 of 1 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
