| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
  |
|
| Problem with Workflow installation?? |
« View previous topic :: View next topic » |
| Author |
Message
|
| eswarnv |
 Posted: Thu Jul 18, 2002 7:17 am Post subject: Problem with Workflow installation?? |
 |
|
Voyager
Joined: 20 Dec 2001
Posts: 88
|
Hi
While installing MQWorkflow on Windows NT i am getting a strange problem. I have successfully installed DB2 and MQSeries. After that while installing MQWorkflow after selecting language(English) simply setup window is quitting out with out any message. what could be the reason?? If anybody having the idea respond quickly as i needed it very urgently??
I have doubt, is static IP address is mandatory to install WorkFlow.
thanks
eswar |
|
| Back to top |
|
 |
| manoj |
| Posted: Mon Jul 22, 2002 6:51 am Post subject: |
|
|
Master
Joined: 30 Jan 2002
Posts: 237
Location: Virgina
|
Hi,
To my knowledge static IP address is not mandatory for installing workflow. Are u sure that it's the problem with selecting the language option as english.
cheers
_________________
-manoj |
|
| Back to top |
|
|
| clindsey |
| Posted: Mon Jul 22, 2002 12:55 pm Post subject: Problem with Workflow Installation |
|
|
Knight
Joined: 12 Jul 2002
Posts: 586
Location: Dallas, Tx
|
Go to Windows Explorer and search all folders for a file with
name fmcsetup.log. If the install got far enough to create it,
it should give you some hint as to the problem.
If no log file, check your environment settings and make
sure you have TEMP defined. You can go to a Command Window and enter 'set TEMP' to see if it is set. If not go though the Control Panel->System and set it to c:\temp.
InstallShield uses this var to set it's SUPPORTDIR.
Go to support.InstallShield.com and then to knowledge base
and look up article Q100198. It will give you many more
items to check related to SUPPORTDIR files and access.
There is one other thing. If you have an install image that
you have downloaded to hard drive, make sure the image
path has no spaces in it ... e.g Program Files\etc. The mqwf
install has a problem with this. |
|
| Back to top |
|
|
| clindsey |
| Posted: Mon Jul 22, 2002 12:56 pm Post subject: Problem with Workflow Installation |
|
|
Knight
Joined: 12 Jul 2002
Posts: 586
Location: Dallas, Tx
|
Go to Windows Explorer and search all folders for a file with
name fmcsetup.log. If the install got far enough to create it,
it should give you some hint as to the problem.
If no log file, check your environment settings and make
sure you have TEMP defined. You can go to a Command Window and enter 'set TEMP' to see if it is set. If not go though the Control Panel->System and set it to c:\temp.
InstallShield uses this var to set it's SUPPORTDIR.
Go to support.InstallShield.com and then to knowledge base
and look up article Q100198. It will give you many more
items to check related to SUPPORTDIR files and access.
There is one other thing. If you have an install image that
you have downloaded to hard drive, make sure the image
path has no spaces in it ... e.g Program Files\etc. The mqwf
install has a problem with this. |
|
| Back to top |
|
|
|
|
|
| |
|
Page 1 of 1 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
