| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
  |
|
| SVRCON trouble on Win |
« View previous topic :: View next topic » |
| Author |
Message
|
| EB |
 Posted: Wed Mar 24, 2004 12:35 am Post subject: SVRCON trouble on Win |
 |
|
Acolyte
Joined: 19 Mar 2004
Posts: 70
|
I have a QMGR running on W2K server and want to connect an application located on a different W2Kbox via SVRCON, also the application is on another segment in the network.
When I try to connect the connection failes with TCP/IP return code 10054(X'2746').
I have now set up a MQ QMGR on the application side with ordinary channels to test communication. MQ ping is succeccfull pinging from the applicationside. Pinging the other way however results in failure (remote channel not available).
Checking the network resultet in that the applicationside did not listen on the spesified port although listener was up and running on that spesific port.
By setting the correct port in the TCP tab of QMGR properties in services I was able to ping both ways, meaning of course communication is up and running. This however does not solve the problen for the SVRCON which I originally am looking for.
My question is:
How can I get this communication running for a SVRCON?
I hope my posting was understandable. Any suggestions are greatly appreciated. |
|
| Back to top |
|
 |
| gunter |
| Posted: Wed Mar 24, 2004 1:21 am Post subject: |
|
|
Partisan
Joined: 21 Jan 2004
Posts: 307
Location: Germany, Frankfurt
|
It looks, if you have a network problem.
- Make sure, you have a route between both machines in both directions.
- If using, check the DNS on both machines
- try telnet <machine> <port>, if the listener is reachable, telnet will connect it.
- check the system event log
If this doesn't help, google 10054, you'll find some interesting problem reports like this:
http://community.borland.com/article/0,1410,25340,00.html
_________________
Gunter Jeschawitz
IBM Certified System Administrator - Websphere MQ, 5.3 |
|
| Back to top |
|
|
| EB |
| Posted: Wed Mar 24, 2004 11:54 pm Post subject: Further conciderations |
|
|
Acolyte
Joined: 19 Mar 2004
Posts: 70
|
Hi Gunter
Thank you for your reply. I have tried telnet without being able to reach the listener. I wonder if the fact that the box with the application does not have a permanent IP adress may have some impact. Is it nescesarry for the box to have a permanent IP adress for SVRCON to work? |
|
| Back to top |
|
|
| mrlinux |
| Posted: Thu Mar 25, 2004 10:49 am Post subject: |
|
|
Grand Master
Joined: 14 Feb 2002
Posts: 1261
Location: Detroit,MI USA
|
A permanent IP is not a requirement as long as the conname is valid hostname that will resolve to the correct IP.
From your error message it sounds like the listener is working but the channel name are using doesnt exist on the server ???
_________________
Jeff
IBM Certified Developer MQSeries
IBM Certified Specialist MQSeries
IBM Certified Solutions Expert MQSeries |
|
| Back to top |
|
|
|
|
|
| |
|
Page 1 of 1 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
