| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
  |
|
| XML tag is a number, fail to publish |
« View previous topic :: View next topic » |
| Author |
Message
|
| wilsonho3 |
 Posted: Sun Sep 19, 2010 7:14 pm Post subject: XML tag is a number, fail to publish |
 |
|
Voyager
Joined: 20 Nov 2001
Posts: 98
Location: Hong Kong
|
Hi, all
I have a XML parse issue in a publication node.
1. flow was deployed with following setting:
MQInput --> Compute --> Publisation
MQInput = a local queue on broker Qmanager, XMLNSC message domain
Compute = ESQL :
| Code: |
CREATE COMPUTE MODULE XML_PUB_Compute
CREATE FUNCTION Main() RETURNS BOOLEAN
BEGIN
CALL CopyMessageHeaders();
-- Set up the Publication
SET OutputRoot.MQRFH2.psc.Command = 'Publish';
SET OutputRoot.MQRFH2.psc.PubOpt = 'Local';
SET OutputRoot.MQRFH2.psc.Topic =
'XML/'||InputRoot.XMLNSC.CXNOTOC.FLT.NUM;
SET OutputRoot.XML = InputRoot.XMLNSC;
RETURN TRUE;
END;
CREATE PROCEDURE CopyMessageHeaders() BEGIN
DECLARE I INTEGER 1;
DECLARE J INTEGER;
SET J = CARDINALITY(InputRoot.*[]);
WHILE I < J DO
SET OutputRoot.*[I] = InputRoot.*[I];
SET I = I + 1;
END WHILE;
END;
CREATE PROCEDURE CopyEntireMessage() BEGIN
SET OutputRoot = InputRoot;
END;
END MODULE; |
2. Write a XML file to local queue with following content:
<CXNOTOC>
<FLT>
<NUM>CX450</NUM>
<A>abc</A>
</FLT>
</CXNOTOC>
3. It successfully publish a Topic "XML/CX450
4. However, if the XML file contain a field which field named in a number, it will failed to publish (test.xml):
<CXNOTOC>
<FLT>
<NUM>CX450</NUM>
<1>abc</1>
</FLT>
</CXNOTOC>
What is wrong in the XML parser. and how should handle situation
like that, pls advise ??
this is the trace
--------------------
Timestamps are formatted in local time, 480 minutes past GMT.
Trace written by version ; formatter version 6103
| Code: |
2010-09-17 17:28:35.601080 8225 UserTrace BIP4040I: The Execution Group ''Test_PubSub'' has processed a configuration message successfully.
A configuration message has been processed successfully. Any configuration changes have been made and stored persistently.
No user action required.
2010-09-17 17:28:35.601352 8225 UserTrace BIP2638I: The MQ output node 'ConfigurationMessageFlow.outputNode' attempted to write a message to queue ''SYSTEM.BROKER.EXECUTIONGROUP.REPLY'' connected to queue manager ''BKQMD01''. The MQCC was '0' and the MQRC was '0'.
2010-09-17 17:28:35.601364 8225 UserTrace BIP2622I: Message successfully output by output node 'ConfigurationMessageFlow.outputNode' to queue ''SYSTEM.BROKER.EXECUTIONGROUP.REPLY'' on queue manager ''BKQMD01''.
2010-09-17 17:28:35.601504 8225 Information BIP2154I: Execution group finished with Configuration message.
A command response will be sent to the broker.
No user action required.
2010-09-17 17:28:57.562024 7315 UserTrace BIP2632I: Message received and propagated to 'out' terminal of MQ input node 'XML_PUB.MQInput'.
2010-09-17 17:28:57.562112 7315 UserTrace BIP6060I: Parser type ''Properties'' created on behalf of node 'XML_PUB.MQInput' to handle portion of incoming message of length 0 bytes beginning at offset '0'.
2010-09-17 17:28:57.562132 7315 UserTrace BIP6061I: Parser type ''MQMD'' created on behalf of node 'XML_PUB.MQInput' to handle portion of incoming message of length '364' bytes beginning at offset '0'. Parser type selected based on value ''MQHMD'' from previous parser.
2010-09-17 17:28:57.562180 7315 UserTrace BIP6061I: Parser type ''XMLNSC'' created on behalf of node 'XML_PUB.MQInput' to handle portion of incoming message of length '72' bytes beginning at offset '364'. Parser type selected based on value ''XMLNSC'' from previous parser.
2010-09-17 17:28:57.562220 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''BEGIN ... END;'' at ('.XML_PUB_Compute.Main', '2.2').
2010-09-17 17:28:57.562256 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''CopyMessageHeaders();'' at ('.XML_PUB_Compute.Main', '3.3').
2010-09-17 17:28:57.562276 7315 UserTrace BIP2538I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''CopyMessageHeaders()'' at ('.XML_PUB_Compute.Main', '3.8').
2010-09-17 17:28:57.562304 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''BEGIN ... END;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '1.40').
2010-09-17 17:28:57.562328 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''DECLARE I INTEGER 1;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '2.3').
2010-09-17 17:28:57.562352 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''DECLARE J INTEGER;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '3.3').
2010-09-17 17:28:57.562376 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET J = CARDINALITY(InputRoot.*:*[ ]);'' at ('.XML_PUB_Compute.CopyMessageHeaders', '4.3').
2010-09-17 17:28:57.562440 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''InputRoot.*:*[ ]'' at ('.XML_PUB_Compute.CopyMessageHeaders', '4.23'). This resolved to ''InputRoot.*:*[]''. The result was ''LIST... First Element Type=16777216 NameSpace='' Name='Properties' Value=NULL''.
2010-09-17 17:28:57.562460 7315 UserTrace BIP2540I: Node 'XML_PUB.XML_PUB_Compute': Finished evaluating expression ''CARDINALITY(InputRoot.*:*[ ])'' at ('.XML_PUB_Compute.CopyMessageHeaders', '4.11'). The result was ''3''.
2010-09-17 17:28:57.562480 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''WHILE I < J DO ... END WHILE;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.3').
2010-09-17 17:28:57.562500 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''I''. The result was ''1''.
2010-09-17 17:28:57.562524 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.13'). This resolved to ''J''. The result was ''3''.
2010-09-17 17:28:57.562548 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I < J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''1 < 3''. The result was ''TRUE''.
2010-09-17 17:28:57.562588 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.*:*[I] = InputRoot.*:*[I];'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.4').
2010-09-17 17:28:57.562612 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.38'). This resolved to ''I''. The result was ''1''.
2010-09-17 17:28:57.562628 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.38'). This resolved to ''I''. The result was ''1''.
2010-09-17 17:28:57.562652 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''InputRoot.*:*[I]'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.26'). This resolved to ''InputRoot.*:*[1]''. The result was ''ROW... Root Element Type=16777216 NameSpace='' Name='Properties' Value=NULL''.
2010-09-17 17:28:57.562676 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.21'). This resolved to ''I''. The result was ''1''.
2010-09-17 17:28:57.562692 7315 UserTrace BIP2568I: Node 'XML_PUB.XML_PUB_Compute': Copying sub-tree from ''InputRoot.*:*[I]'' to ''OutputRoot.*:*[I]''.
2010-09-17 17:28:57.562736 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET I = I + 1;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.4').
2010-09-17 17:28:57.562756 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.12'). This resolved to ''I''. The result was ''1''.
2010-09-17 17:28:57.562780 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I + 1'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.14'). This resolved to ''1 + 1''. The result was ''2''.
2010-09-17 17:28:57.562792 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''I''. The result was ''2''.
2010-09-17 17:28:57.562808 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.13'). This resolved to ''J''. The result was ''3''.
2010-09-17 17:28:57.562828 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I < J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''2 < 3''. The result was ''TRUE''.
2010-09-17 17:28:57.562848 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.*:*[I] = InputRoot.*:*[I];'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.4').
2010-09-17 17:28:57.562868 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.38'). This resolved to ''I''. The result was ''2''.
2010-09-17 17:28:57.562884 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.38'). This resolved to ''I''. The result was ''2''.
2010-09-17 17:28:57.562916 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''InputRoot.*:*[I]'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.26'). This resolved to ''InputRoot.*:*[2]''. The result was ''ROW... Root Element Type=16777216 NameSpace='' Name='MQMD' Value=NULL''.
2010-09-17 17:28:57.562940 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '6.21'). This resolved to ''I''. The result was ''2''.
2010-09-17 17:28:57.562960 7315 UserTrace BIP2568I: Node 'XML_PUB.XML_PUB_Compute': Copying sub-tree from ''InputRoot.*:*[I]'' to ''OutputRoot.*:*[I]''.
2010-09-17 17:28:57.562984 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET I = I + 1;'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.4').
2010-09-17 17:28:57.563004 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.12'). This resolved to ''I''. The result was ''2''.
2010-09-17 17:28:57.563024 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I + 1'' at ('.XML_PUB_Compute.CopyMessageHeaders', '7.14'). This resolved to ''2 + 1''. The result was ''3''.
2010-09-17 17:28:57.563036 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''I''. The result was ''3''.
2010-09-17 17:28:57.563052 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.13'). This resolved to ''J''. The result was ''3''.
2010-09-17 17:28:57.563076 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''I < J'' at ('.XML_PUB_Compute.CopyMessageHeaders', '5.9'). This resolved to ''3 < 3''. The result was ''FALSE''.
2010-09-17 17:28:57.563104 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.MQRFH2.psc.Command = 'Publish';'' at ('.XML_PUB_Compute.Main', '5.3').
2010-09-17 17:28:57.563144 7315 UserTrace BIP2566I: Node 'XML_PUB.XML_PUB_Compute': Assigning value '''Publish''' to field / variable ''OutputRoot.MQRFH2.psc.Command''.
2010-09-17 17:28:57.563168 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.MQRFH2.psc.PubOpt = 'Local';'' at ('.XML_PUB_Compute.Main', '6.3').
2010-09-17 17:28:57.563192 7315 UserTrace BIP2566I: Node 'XML_PUB.XML_PUB_Compute': Assigning value '''Local''' to field / variable ''OutputRoot.MQRFH2.psc.PubOpt''.
2010-09-17 17:28:57.563212 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.MQRFH2.psc.Topic = 'XML/' || InputRoot.XMLNSC.CXNOTOC.FLT.NUM;'' at ('.XML_PUB_Compute.Main', '7.3').
2010-09-17 17:28:57.563308 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression ''InputRoot.XMLNSC.CXNOTOC.FLT.NUM'' at ('.XML_PUB_Compute.Main', '7.45'). This resolved to ''InputRoot.XMLNSC.CXNOTOC.FLT.NUM''. The result was '''CX450'''.
2010-09-17 17:28:57.563336 7315 UserTrace BIP2539I: Node 'XML_PUB.XML_PUB_Compute': Evaluating expression '''XML/' || InputRoot.XMLNSC.CXNOTOC.FLT.NUM'' at ('.XML_PUB_Compute.Main', '7.43'). This resolved to '''XML/' || 'CX450'''. The result was '''XML/CX450'''.
2010-09-17 17:28:57.563360 7315 UserTrace BIP2566I: Node 'XML_PUB.XML_PUB_Compute': Assigning value '''XML/CX450''' to field / variable ''OutputRoot.MQRFH2.psc.Topic''.
2010-09-17 17:28:57.563388 7315 UserTrace BIP2537I: Node 'XML_PUB.XML_PUB_Compute': Executing statement ''SET OutputRoot.XML = InputRoot.XMLNSC;'' at ('.XML_PUB_Compute.Main', '8.3').
2010-09-17 17:28:57.563464 7315 UserTrace BIP5004E: An XML parsing error ''The content of elements must consist of well-formed character data or markup.'' occurred on line 4 column 3 when parsing element ''/Root/XMLNSC/CXNOTOC/FLT''. Internal error codes are '1519' and '2'.
This error was reported by the generic XML parser, and is usually the result of a badly formed XML message.
Check that the input XML message is a well-formed XML message that adheres to the XML specification. The line number and column number that are quoted in the message give the position where the parser discovered the problem. However, the actual error might be earlier in the message.
Other possible causes are:
1. A character that is not supported by XML occurs in the instance message data.
XML supports only a subset of control characters; therefore, ensure that no unsupported characters, such as X'00', appear in the document.
2. The Coded Character Set ID that is defined in the message header does not reflect the contents of the instance message.
If the XML document has an XML prologue, the WebSphere MQ CodedCharSetId should be consistent with the XML Encoding field.
3. A reserved XML character appears in the instance message data.
Characters that might be recognized as XML markup - for example, < and & - should be replaced with the corresponding XML entities - < and &.
2010-09-17 17:28:57.564424 7315 Error BIP2628E: Exception condition detected on input node 'XML_PUB.MQInput'.
The input node 'XML_PUB.MQInput' detected an error whilst processing a message. The message flow has been rolled-back and, if the message was being processed in a unit of work, it will remain on the input queue to be processed again. Following messages will indicate the cause of this exception.
Check the error messages which follow to determine why the exception was generated, and take action as described by those messages.
2010-09-17 17:28:57.564432 7315 RecoverableException BIP2230E: Error detected whilst processing a message in node 'XML_PUB.XML_PUB_Compute'.
The message broker detected an error whilst processing a message in node 'XML_PUB.XML_PUB_Compute'. An exception has been thrown to cut short the processing of the message.
See the following messages for details of the error.
2010-09-17 17:28:57.564436 7315 RecoverableException BIP2488E: ('.XML_PUB_Compute.Main', '8.3') Error detected whilst executing the SQL statement ''SET OutputRoot.XML = InputRoot.XMLNSC;''.
The message broker detected an error whilst executing the given statement. An exception has been thrown to cut short the SQL program.
See the following messages for details of the error.
2010-09-17 17:28:57.564436 7315 ParserException BIP5009E: XML Parsing Errors have occurred.
Errors have occurred during parsing of XML.
Review further error messages for an indication to the cause of the errors.
2010-09-17 17:28:57.564444 7315 ParserException BIP5004E: An XML parsing error ''The content of elements must consist of well-formed character data or markup.'' occurred on line 4 column 3 when parsing element ''/Root/XMLNSC/CXNOTOC/FLT''. Internal error codes are '1519' and '2'.
This error was reported by the generic XML parser, and is usually the result of a badly formed XML message.
Check that the input XML message is a well-formed XML message that adheres to the XML specification. The line number and column number that are quoted in the message give the position where the parser discovered the problem. However, the actual error might be earlier in the message.
Other possible causes are:
1. A character that is not supported by XML occurs in the instance message data.
XML supports only a subset of control characters; therefore, ensure that no unsupported characters, such as X'00', appear in the document.
2. The Coded Character Set ID that is defined in the message header does not reflect the contents of the instance message.
If the XML document has an XML prologue, the WebSphere MQ CodedCharSetId should be consistent with the XML Encoding field.
3. A reserved XML character appears in the instance message data.
Characters that might be recognized as XML markup - for example, < and & - should be replaced with the corresponding XML entities - < and &.
2010-09-17 17:28:58.564896 7315 Error BIP2648E: Message backed out to a queue; node 'XML_PUB.MQInput'.
Node 'XML_PUB.MQInput' has received a message which has previously been backed out one or more times because of a processing error in the main path of the message flow. The failure terminal is not attached, so the message broker is putting the message directly to the requeue or dead letter backout queue associated with this node. The MQMD 'backoutCount' of the message now equals the 'backoutThreshold' defined for the WebSphere MQ input queue.
Examine previous messages and the message flow to determine why the message is being backed out. Correct this situation if possible. Perform any local error recovery processing required.
2010-09-17 17:28:58.565196 7315 UserTrace BIP2638I: The MQ output node 'XML_PUB.MQInput' attempted to write a message to queue ''BKQMD01_DLQ'' connected to queue manager ''BKQMD01''. The MQCC was '0' and the MQRC was '0'.
2010-09-17 17:28:58.565224 7315 UserTrace BIP2615I: The WebSphere MQ input node 'XML_PUB.MQInput' has backed out the message to the backout requeue or the dead letter queue.
Message backout processing has been invoked, and the message has either been backed out by being written to the backout requeue or dead letter queue, as determined by the WebSphere MQ queue manager and queue configuration.
No user action required.
2010-09-17 17:29:16.068762 8225 UserTrace BIP2632I: Message received and propagated to 'out' terminal of MQ input node 'ConfigurationMessageFlow.InputNode'.
2010-09-17 17:29:16.068867 8225 UserTrace BIP6060I: Parser type ''Properties'' created on behalf of node 'ConfigurationMessageFlow.InputNode' to handle portion of incoming message of length 0 bytes beginning at offset '0'.
2010-09-17 17:29:16.068893 8225 UserTrace BIP6061I: Parser type ''MQMD'' created on behalf of node 'ConfigurationMessageFlow.InputNode' to handle portion of incoming message of length '364' bytes beginning at offset '0'. Parser type selected based on value ''MQHMD'' from previous parser.
2010-09-17 17:29:16.068968 8225 UserTrace BIP6061I: Parser type ''XMLS'' created on behalf of node 'ConfigurationMessageFlow.InputNode' to handle portion of incoming message of length '209' bytes beginning at offset '364'. Parser type selected based on value ''XMLS'' from previous parser.
2010-09-17 17:29:16.069174 8225 Information BIP2152I: Configuration message received from broker.
An execution group received a command from the Broker.
No user action required.
2010-09-17 17:29:16.069288 8225 Information BIP2153I: About to ''change'' an execution group.
An execution group is about to perform an action.
No user action required.
Threads encountered in this trace:
7315 8225 |
|
|
| Back to top |
|
 |
| fjb_saper |
| Posted: Sun Sep 19, 2010 8:41 pm Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
Your error and the way to handle it is in the trace:
| Quote: |
OutputRoot.XML = InputRoot.XMLNSC;'' at ('.XML_PUB_Compute.Main', '8.3').
2010-09-17 17:28:57.563464 7315 UserTrace BIP5004E: An XML parsing error ''The content of elements must consist of well-formed character data or markup.'' occurred on line 4 column 3 when parsing element ''/Root/XMLNSC/CXNOTOC/FLT''. Internal error codes are '1519' and '2'.
This error was reported by the generic XML parser, and is usually the result of a badly formed XML message.
Check that the input XML message is a well-formed XML message that adheres to the XML specification. The line number and column number that are quoted in the message give the position where the parser discovered the problem. However, the actual error might be earlier in the message.
Other possible causes are:
1. A character that is not supported by XML occurs in the instance message data.
XML supports only a subset of control characters; therefore, ensure that no unsupported characters, such as X'00', appear in the document.
2. The Coded Character Set ID that is defined in the message header does not reflect the contents of the instance message.
If the XML document has an XML prologue, the WebSphere MQ CodedCharSetId should be consistent with the XML Encoding field.
3. A reserved XML character appears in the instance message data.
Characters that might be recognized as XML markup - for example, < and & - should be replaced with the corresponding XML entities - < and &.
2010-09-17 17:28:57.564424 7315 Error BIP2628E: Exception condition detected on input node 'XML_PUB.MQInput'.
The input node 'XML_PUB.MQInput' detected an error whilst processing a message. The message flow has been rolled-back and, if the message was being processed in a unit of work, it will remain on the input queue to be processed again. Following messages will indicate the cause of this exception.
Check the error messages which follow to determine why the exception was generated, and take action as described by those messages. |
So you have multiple strikes against you:
| Quote: |
| OutputRoot.XML = InputRoot.XMLNSC; |
You should have used OutputRoot.XMLNSC. This makes things so much easier, especially if you have attributes and other stuff to handle.
Kimbert will tell you that the XML domain is deprecated...
As for the other stuff (CCSID), I don't see you setting it anywhere. Maybe it needs to be set explicitly to CCSID 1208 (UTF-8 ).
And I would expect you to set it explicitly on the Properties, the MQMD and on both parts of the MQRFH2...
Have fun 
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| wilsonho3 |
| Posted: Mon Sep 20, 2010 12:51 am Post subject: |
|
|
Voyager
Joined: 20 Nov 2001
Posts: 98
Location: Hong Kong
|
Just reply by IBM numeric tag is not support for XML parser.
A valid name used in a tag must be started with letters (including non-Latin characters) or the dash (-), but not numbers or other punctuation characters. So <1> </1> is not a valid tag and the error BIP5004E reflects this. |
|
| Back to top |
|
|
| kimbert |
| Posted: Mon Sep 20, 2010 1:17 am Post subject: |
|
|
Jedi Council
Joined: 29 Jul 2003
Posts: 5542
Location: Southampton
|
I noticed this line in your ESQL:
| Code: |
| SET OutputRoot.XML = InputRoot.XMLNSC; |
Is there a reason why why you are changing the domain from XMLNSC to XML? |
|
| Back to top |
|
|
| mqjeff |
| Posted: Mon Sep 20, 2010 1:35 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
| wilsonho3 wrote: |
Just reply by IBM numeric tag is not support for XML parser.
A valid name used in a tag must be started with letters (including non-Latin characters) or the dash (-), but not numbers or other punctuation characters. So <1> </1> is not a valid tag and the error BIP5004E reflects this. |
To be clear, this is not the XML parser that does not support this. It's the XML Specification that does not allow this.
http://www.w3.org/TR/xml11/#NT-NameStartChar |
|
| Back to top |
|
|
| wilsonho3 |
| Posted: Mon Sep 20, 2010 1:41 am Post subject: |
|
|
Voyager
Joined: 20 Nov 2001
Posts: 98
Location: Hong Kong
|
change to this even can not publish message
Compute = ESQL :
CREATE COMPUTE MODULE XML_PUB_Compute
CREATE FUNCTION Main() RETURNS BOOLEAN
BEGIN
CALL CopyMessageHeaders();
-- Set up the Publication
CREATE NEXTSIBLING OF OutputRoot.MQMD NAME 'MQRFH2';
SET OutputRoot.MQMD.CodedCharSetId = '1208';
SET OutputRoot.MQMD.Format = 'MQHRF2';
SET OutputRoot.MQRFH2.Version = '2';
SET OutputRoot.MQRFH2.Format = InputRoot.MQMD.Format;
SET OutputRoot.MQRFH2.Encoding= InputRoot.MQMD.Encoding;
SET OutputRoot.MQRFH2.CodedCharSetId = InputRoot.MQMD.CodedCharSet
SET OutputRoot.MQRFH2.Flags = '0';
SET OutputRoot.MQRFH2.NameValueCCSID = '1208';
SET OutputRoot.MQRFH2.psc.Command = 'Publish';
SET OutputRoot.MQRFH2.psc.PubOpt = 'Local';
SET OutputRoot.MQRFH2.psc.Topic = 'XML/'||InputRoot.XMLNSC.CXNOTOC.FLT.NUM;
-- SET OutputRoot.XML = InputRoot.XMLNSC;
SET OutputRoot.XMLNSC = InputRoot.XMLNSC;
RETURN TRUE;
END;
CREATE PROCEDURE CopyMessageHeaders() BEGIN
DECLARE I INTEGER 1;
DECLARE J INTEGER;
SET J = CARDINALITY(InputRoot.*[]);
WHILE I < J DO
SET OutputRoot.*[I] = InputRoot.*[I];
SET I = I + 1;
END WHILE;
END; |
|
| Back to top |
|
|
| mqjeff |
| Posted: Mon Sep 20, 2010 1:44 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
WHY are you enclosing a NUMERIC value in QUOTES?
CCSIDs are INTEGERs. DO NOT USE ''. |
|
| Back to top |
|
|
| wilsonho3 |
| Posted: Mon Sep 20, 2010 1:47 am Post subject: |
|
|
Voyager
Joined: 20 Nov 2001
Posts: 98
Location: Hong Kong
|
I know, correct all the numeric field with no ' ', still not work. no
publish |
|
| Back to top |
|
|
| kimbert |
| Posted: Mon Sep 20, 2010 1:48 am Post subject: |
|
|
Jedi Council
Joined: 29 Jul 2003
Posts: 5542
Location: Southampton
|
| Quote: |
| change to this even can not publish message |
We cannot help you unless you describe the problem. Please quote the error messge that you are getting.
Did you change the XML to remove the illegal <1> tag? |
|
| Back to top |
|
|
| wilsonho3 |
| Posted: Mon Sep 20, 2010 1:49 am Post subject: |
|
|
Voyager
Joined: 20 Nov 2001
Posts: 98
Location: Hong Kong
|
I ask users to change to
<group-item>
<a>ddd</a>
<b>ddd</b>
....
</group-item>
it works. ths |
|
| Back to top |
|
|
|
|
|
| |
|
Page 1 of 1 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
