MQSeries.net :: View topic

Hanuman · Posted: Thu Oct 12, 2006 5:13 am Post subject:

Ok let me explain what I did â€¦
1. Start MQSC by typing the command:
runmqsc
A message tells you that an MQSC session has started. MQSC has no command prompt.
2. Define a server-connection channel by typing the following command on one line:
define channel(CLIENT.QM_orf_qa01) chltype(SVRCONN) trptype(TCP) mcauser('mqm')
A message tells you when the channel has been created.
3. Stop MQSC by typing:
end
Some messages are displayed followed by the command prompt.
4. Start a listener by typing the following command:
runmqlsr -t tcp
then invoked the clientâ€¦ from windowsxp mq
1. Open the Control Panel: Click Start > Settings > Control Panel
2. Double-click System.
3. Click the Advanced tab.
4. Click Environment Variables.
5. In the User Variables pane, click New.
6. Type MQSERVER into the Variable Name field.
7. Type into the CLIENT.QM_orf_qa01/TCP/3.209.124.60(1414)Variable Value field, where hostname is the computer name or IP address that identifies the machine hosting queue manager QM_orf_qa01. If you do not use the default port number 1414, you must also specify the port number where the listener is listening,

8. Click OK. The MQSERVER environment variable will appear in the User Variables pane.

Open a command prompt on the client and follow these steps:
1. Start the amqsputc sample program as follows:
o On Linux, change to the /opt/mqm/samp/bin directory and type the command: ./amqsputc Q1
o On Windows, type the command: amqsputc GEN2OSM_CPM_ALARM

The following messages are displayed:
Sample AMQSPUT0 start
target queue is Q1
2. Type some message text on one or more lines, then press Enter twice. The following message is displayed:
C:\Documents and Settings\942504>amqsputc GEN2OSM_CPM_ALARM
where GEN2OSM_CPM_ALARM is channel defined on Qmanager..

Sample AMQSPUT0 start
MQCONN ended with reason code 2059
This time error code was

10/12/2006 16:29:26 - Process(3280.1) User(942504) Program(amqsputc.exe)
AMQ9202: Remote host 'elabsvr2 (3.209.124.60) (1414)' not available, retry
later.

EXPLANATION:
The attempt to allocate a conversation using TCP/IP to host 'elabsvr2
(3.209.124.60) (1414)' was not successful. However the error may be a
transitory one and it may be possible to successfully allocate a TCP/IP
conversation later.
ACTION:
Try the connection again later. If the failure persists, record the error
values and contact your systems administrator. The return code from TCP/IP is
10061 (X'274D'). The reason for the failure may be that this host cannot reach
the destination host. It may also be possible that the listening program at
host 'elabsvr2 (3.209.124.60) (1414)' was not running. If this is the case,
perform the relevant operations to start the TCP/IP listening program, and try
again.

then I did was this

setmqaut -m QM_orf_qa01 -n SYSTEM.DEFAULT.LOCAL.QUEUE -t queue -p 942504 +allmqi

since client user id iis my deskstop where user id 942504

10/12/2006 16:44:23 - Process(3860.1) User(942504) Program(amqsputc.exe)
AMQ9520: Channel not defined remotely.

EXPLANATION:
There is no definition of channel 'CLIENT.QM_orf_qa01' at the remote location.
ACTION:
Add an appropriate definition to the remote hosts list of defined channels and
retry the operation.

Pls tell what think did I do wrong hereâ€¦â€¦.

And how to resolve this error

MQCONN ended with reason code 2059