| |
|
RSS Feed - WebSphere MQ Support
|
RSS Feed - Message Broker Support
|
| MQRC 3014 on MQCMD_SET_AUTH_REC |
« View previous topic :: View next topic » |
| Author |
Message
|
| vignesh1988 |
 Posted: Thu Apr 03, 2014 6:07 am Post subject: MQRC 3014 on MQCMD_SET_AUTH_REC |
 |
|
Acolyte
Joined: 13 Apr 2013
Posts: 62
Location: Chennai
|
Hello All,
I am not sure, am posting this at the right Index "Websphere MQ Security".
I have the below code snippet returning me 3014 (MQRCCF_CFIN_PARM_ID_ERROR) , I give all the necessary parameters IBM Suggests in there WMQ 7.0 Infocenter.
| Code: |
mqAddString(adminBag, MQCACF_AUTH_PROFILE_NAME, MQBL_NULL_TERMINATED, "*", &compCode, &reason);
mqAddInteger(adminBag, MQIACF_OBJECT_TYPE, MQOT_Q, &compCode, &reason);
mqAddInteger(adminBag, MQIACF_AUTH_ADD_AUTHS, MQAUTH_BROWSE, &compCode, &reason);
mqAddString(adminBag, MQCACF_GROUP_ENTITY_NAMES, MQBL_NULL_TERMINATED, "mqm", &compCode, &reason);
mqExecute(hConn, /* WebSphere MQ connection handle */
MQCMD_SET_AUTH_REC, /* Command to be executed */
MQHB_NONE, /* No options bag */
adminBag, /* Handle to bag containing commands */
responseBag, /* Handle to bag to receive the response*/
MQHO_NONE, /* Put msg on SYSTEM.ADMIN.COMMAND.QUEUE*/
MQHO_NONE, /* Create a dynamic q for the response */
&compCode, /* Completion code from the mqExecute */
&reason);
|
The above is my code, on which am facing this issue.. Can some people help me out. I wasted 2 days on this.. |
|
| Back to top |
|
 |
| RogerLacroix |
| Posted: Fri Apr 04, 2014 8:51 am Post subject: Re: MQRC 3014 on MQCMD_SET_AUTH_REC |
|
|
Jedi Knight
Joined: 15 May 2001
Posts: 3264
Location: London, ON Canada
|
| vignesh1988 wrote: |
| I have the below code snippet returning me 3014 (MQRCCF_CFIN_PARM_ID_ERROR) , I give all the necessary parameters IBM Suggests in there WMQ 7.0 Infocenter. |
MQAI does not support either an MQCFIL or MQCFSL PCF types.
Go look up your parameters here and make sure that you are not using any of them, if you are, then you will need to switch to sending and receiving raw PCF commands.
Regards,
Roger Lacroix
Capitalware Inc.
_________________
Capitalware: Transforming tomorrow into today.
Connected to MQ!
Twitter |
|
| Back to top |
|
|
| vignesh1988 |
| Posted: Fri Apr 04, 2014 9:07 am Post subject: |
|
|
Acolyte
Joined: 13 Apr 2013
Posts: 62
Location: Chennai
|
But IBM Doesn't say it will not support MQAI calls for Authority Records anywhere in it's WMQ 7.0.
I am using WMQ 7.0.1.4 and a Linux System
What do you mean by Raw RCF Command?
Could you please give me a sample code for a RAW PCF Command?
Your response greatly Appreciated |
|
| Back to top |
|
|
| RogerLacroix |
| Posted: Fri Apr 04, 2014 9:12 am Post subject: |
|
|
Jedi Knight
Joined: 15 May 2001
Posts: 3264
Location: London, ON Canada
|
| vignesh1988 wrote: |
| But IBM Doesn't say it will not support MQAI calls for Authority Records anywhere in it's WMQ 7.0. |
That's NOT what I said. I said MQAI does not support MQCFIL or MQCFSL PCF types. It supports all of the other PCF types.
Open a PMR with IBM and Level 3 will tell you the same thing.
| vignesh1988 wrote: |
What do you mean by Raw RCF Command?
Could you please give me a sample code for a RAW PCF Command? |
Go download the source code for SupportPac MS03.
Regards,
Roger Lacroix
Capitalware Inc.
_________________
Capitalware: Transforming tomorrow into today.
Connected to MQ!
Twitter |
|
| Back to top |
|
|
| mqjeff |
| Posted: Fri Apr 04, 2014 9:38 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
The MQAI is the MQ Administrative Interface.
It is a separate application layer on top of PCF messages.
It's, in theory, supposed to be "easier to use" than regular PCF messages.
I've always found it much more confusing. What's a bag? Why am I putting data structures into a bag?
If you want to use something relatively straight forward, use the Java MQ PCF API.
The MQAI does not support the commands you are trying to run, because it does not support the parameters you need to set on the commands you are trying to run. |
|
| Back to top |
|
|
| vignesh1988 |
| Posted: Fri Apr 04, 2014 10:37 am Post subject: |
|
|
Acolyte
Joined: 13 Apr 2013
Posts: 62
Location: Chennai
|
Ok. I am going to follow Raw PCF commands, I dont know Java.. If you could provide me the code in Java i can appreciate it.
Below is what i wrote for "Raw PCF Message"
| Code: |
AdminMsgLen = MQCFH_STRUC_LENGTH
+ MQCFST_STRUC_LENGTH_FIXED + MQ_AUTH_PROFILE_NAME_LENGTH
+ MQCFIN_STRUC_LENGTH + MQCFIL_STRUC_LENGTH_FIXED + MQCFSL_STRUC_LENGTH_FIXED + MQ_ENTITY_NAME_LENGTH
;
pAdminMsg = (MQBYTE *)malloc( AdminMsgLen );
pPCFHeader = (MQCFH *)pAdminMsg;
pPCFString = (MQCFST *)(pAdminMsg
+ MQCFH_STRUC_LENGTH
);
pPCFInteger = (MQCFIN *)( pAdminMsg
+ MQCFH_STRUC_LENGTH
+ MQCFST_STRUC_LENGTH_FIXED
);
pPCFHeader->Type = /*MQCFT_COMMAND*/MQCFT_COMMAND_XR;
pPCFHeader->StrucLength = MQCFH_STRUC_LENGTH;
pPCFHeader->Version = MQCFH_VERSION_1;
pPCFHeader->Command = MQCMD_SET_AUTH_REC;
pPCFHeader->MsgSeqNumber = MQCFC_LAST;
pPCFHeader->Control = MQCFC_LAST;
pPCFHeader->ParameterCount = 4;
/* Setup parameter block */
pPCFString->Type = MQCFT_STRING;
pPCFString->StrucLength = MQCFST_STRUC_LENGTH_FIXED + MQ_AUTH_PROFILE_NAME_LENGTH;
pPCFString->Parameter = MQCACF_AUTH_PROFILE_NAME;
pPCFString->CodedCharSetId = MQCCSI_DEFAULT;
pPCFString->StringLength = MQ_AUTH_PROFILE_NAME_LENGTH;
memset( pPCFString->String, ' ', MQ_AUTH_PROFILE_NAME_LENGTH );
strcpy(pPCFString->String,"XBBJ605.SET.TEST.QUEUE\0");
printf("%s\n",pPCFString->String);
/* Setup parameter block */
pPCFInteger->Type = MQCFT_INTEGER;
pPCFInteger->StrucLength = MQCFIN_STRUC_LENGTH;
pPCFInteger->Parameter = MQIACF_OBJECT_TYPE;
pPCFInteger->Value = MQOT_Q;
pPCFInteger->Type = MQCFT_INTEGER;
pPCFInteger->StrucLength = MQCFIL_STRUC_LENGTH_FIXED;
pPCFInteger->Parameter = MQIACF_AUTH_ADD_AUTHS;
pPCFInteger->Value = MQAUTH_BROWSE;
pPCFString->Type = MQCFT_STRING;
pPCFString->StrucLength = MQCFSL_STRUC_LENGTH_FIXED + MQ_ENTITY_NAME_LENGTH;
pPCFString->Parameter = MQCACF_GROUP_ENTITY_NAMES;
pPCFString->CodedCharSetId = MQCCSI_DEFAULT;
pPCFString->StringLength = MQ_AUTH_PROFILE_NAME_LENGTH;
memset( pPCFString->String, ' ', MQ_ENTITY_NAME_LENGTH );
strcpy(pPCFString->String,"wigc01\0");
printf("%s\n",pPCFString->String);
PutMsg( hConn /* Queue manager handle */
, MQFMT_ADMIN /* Format of message */
, hAdminQ /* Handle of command queue */
, "XBBJ605.MODEL.QUEUE\0" /* reply to queue */
, (MQBYTE *)pAdminMsg /* Data part of message to put */
, AdminMsgLen
);
|
Can you please check and advise if it's all correct? Since I dont see any response message (or) Neither an Error if i run this code.
Will Set-Authority give any responses? I dont see any response page for SET_AUTH_REC_CMD in IBM WMQ 7 Infocenter.
Please assist |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Fri Apr 04, 2014 8:28 pm Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
You're talking about 7.0 but I don't remember AUTHREC's being available before 7.1... Maybe it's time to take a breath and go back to setmqaut? 
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| vignesh1988 |
| Posted: Sat Apr 05, 2014 2:21 am Post subject: |
|
|
Acolyte
Joined: 13 Apr 2013
Posts: 62
Location: Chennai
|
Isn't SET AUTREC MQSC command is only revealed above 7.1 Versions??...
If the MQCMD_SET_AUTH_REC PCF calls are not supported by IBM WebSphere 7.0 , for what reason they have specified those information's in there WMQ 7.0 Info center and wasting everyone's time here.. |
|
| Back to top |
|
|
| mqjeff |
| Posted: Sat Apr 05, 2014 6:55 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
The command is documented in the v7 info center, so it should be applicable to v7.0.
It is only documented to return an error, if an error occurs.
If you don't receive an error, you can assume that the command has completed.
If you want to verify that the command has completed, you can either use mqsc or a different PCF message to inquire about the existence of an authority record. |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Sat Apr 05, 2014 9:57 am Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
| mqjeff wrote: |
The command is documented in the v7 info center, so it should be applicable to v7.0.
It is only documented to return an error, if an error occurs.
If you don't receive an error, you can assume that the command has completed.
If you want to verify that the command has completed, you can either use mqsc or a different PCF message to inquire about the existence of an authority record. |
You mean to say that the pcf version was available before the mqsc version and is supposed to work in 7.0.1.x ?
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| mqjeff |
| Posted: Sat Apr 05, 2014 10:50 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
| fjb_saper wrote: |
| mqjeff wrote: |
The command is documented in the v7 info center, so it should be applicable to v7.0.
It is only documented to return an error, if an error occurs.
If you don't receive an error, you can assume that the command has completed.
If you want to verify that the command has completed, you can either use mqsc or a different PCF message to inquire about the existence of an authority record. |
You mean to say that the pcf version was available before the mqsc version and is supposed to work in 7.0.1.x ? |
http://publib.boulder.ibm.com/infocenter/wmqv7/v7r0/topic/com.ibm.mq.csqzac.doc/pc14090_.htm
Note that this is NOT CHLAUTH. It's AUTHREC. |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Sun Apr 06, 2014 11:21 am Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
|
| Back to top |
|
|
| bruce2359 |
| Posted: Sun Apr 06, 2014 12:00 pm Post subject: |
|
|
Poobah
Joined: 05 Jan 2008
Posts: 9469
Location: US: west coast, almost. Otherwise, enroute.
|
| vignesh1988 wrote: |
| I am using WMQ 7.0.1.4 and a Linux System |
So, you are compiling and executing your code on 7.0.1.4 libraries; and you are trying to PCF-wrap commands for WMQ features available on 7.1 and newer?
7.0.1.4 libraries do not support features implemented and supported at newer versions of the software.
_________________
I like deadlines. I like to wave as they pass by.
ב''ה
Lex Orandi, Lex Credendi, Lex Vivendi. As we Worship, So we Believe, So we Live. |
|
| Back to top |
|
|
| mqjeff |
| Posted: Sun Apr 06, 2014 2:21 pm Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
Don't get me started on the documentation for PCF and MQSC messages.
vignesh1988 is running the PCf program successfully - it compiles and sends a PCF message to the command server queue. The command server fails to return a fault response.
I'd call that "it's supported as PCF at v7.x".
Whether the command actually produces the correct authorization record is a second question, and only answerable by either running vignesh1988's program yourself, or by vignesh1988 issuing a dmpmqaut or otherwise confirming that the authorization record was created. |
|
| Back to top |
|
|
| bruce2359 |
| Posted: Sun Apr 06, 2014 5:27 pm Post subject: |
|
|
Poobah
Joined: 05 Jan 2008
Posts: 9469
Location: US: west coast, almost. Otherwise, enroute.
|
Is the OP targeting the output from the app to a 7.1+ or some other qmgr - remote administration?
_________________
I like deadlines. I like to wave as they pass by.
ב''ה
Lex Orandi, Lex Credendi, Lex Vivendi. As we Worship, So we Believe, So we Live. |
|
| Back to top |
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
