| Author |
Message
|
| jpeela |
 Posted: Mon Sep 13, 2010 11:08 pm Post subject: 2195 error while we ping the sender channel |
 |
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
Hi All,
So long i post my last one. I have a wierd problem occuring in our environment. We are using Windows Server 2003, MQ V 6.0.2.9. I just changed the 'conname' and pinged the channel at the sender side. It is throwing a 2195 error. and checked that we are getting wrong error details like below.
The operation requested cannot be performed on channel 'NLLGS1.NLGOA1.01'. Some
operations are only valid for certain channel types. For example, you can only
ping a channel from the end sending the message.
ACTION:
Check whether the channel name is specified correctly. If it is check that the
channel has been defined correctly.
but i see that i have pinged from the right end.
EXPLANATION:
The operation requested cannot be performed because channel 'NLLGS1.NLGOA1.01'
on the remote machine is not of a suitable type. For example, if the local
channel is defined as a sender the remote machine must define its channel as
either a receiver or requester.
ACTION:
Check that the channel name is specified correctly. If it is, check that the
remote channel has been defined correctly.
But I verified that the channel type is 'receiver' .
Can anyone let me know if this is some kind of bug. I recreated the channel it worked fine. But not sure if i can do the same in production. I need suggessions , how would i rectify this without restart of server or queue managers.
_________________
Jogi |
|
| Back to top |
|
 |
| exerk |
| Posted: Mon Sep 13, 2010 11:23 pm Post subject: |
|
|
Jedi Council
Joined: 02 Nov 2006
Posts: 6339
|
Was the channel in STOP state before you made the change, or did you stop/start the channel after the change?
_________________
It's puzzling, I don't think I've ever seen anything quite like this before...and it's hard to soar like an eagle when you're surrounded by turkeys. |
|
| Back to top |
|
|
| jpeela |
| Posted: Tue Sep 14, 2010 12:12 am Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
Channel in inactive. I have stopped and started after the change. That did not work . I restarted queue manager and server too after much shooting. But no luck. so had recreated finally, which worked. All am worrying is about production , where i cannot do these things. So checking if there is anything else which i can look for fixing it
_________________
Jogi |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Sep 14, 2010 2:19 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
| If you can recreate this, probably you should open a PMR. |
|
| Back to top |
|
|
| jpeela |
| Posted: Tue Sep 14, 2010 5:20 am Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
Anything else that can be done now, other than PMR?
_________________
Jogi |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Sep 14, 2010 6:20 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
| Can you recreate the issue? |
|
| Back to top |
|
|
| jpeela |
| Posted: Tue Sep 14, 2010 6:35 am Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
the 're create' in my earlier post was regarding channel, but not the issue. But we have to different things one in non prod and other in prod. I am able to resolve this is non Prod by re creating the channel. But in Prod a similar issue with different setup totally, i cannot do that. That is why am asking this.
_________________
Jogi |
|
| Back to top |
|
|
| nathanw |
| Posted: Tue Sep 14, 2010 6:42 am Post subject: |
|
|
Knight
Joined: 14 Jul 2004
Posts: 550
|
similar issue, different setup
well then your problem you have described is not the same!
what is the setup in the other environment
_________________
Who is General Failure and why is he reading my hard drive?
Artificial Intelligence stands no chance against Natural Stupidity.
Only the User Trace Speaks The Truth  |
|
| Back to top |
|
|
| jpeela |
| Posted: Tue Sep 14, 2010 6:56 am Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
Hi Nathan,
Both issues are the same 2195 when we ping the channel and if we try starting them they retry. But the projects are different, between different queue managers/Servers, different versions 6.0.2.7 in prod and 6.0.2.9 in non prod.
_________________
Jogi |
|
| Back to top |
|
|
| mqjeff |
| Posted: Tue Sep 14, 2010 7:15 am Post subject: |
|
|
Grand Master
Joined: 25 Jun 2008
Posts: 17447
|
If you go back to the machine in which you recreated the channel, and you AGAIN change the conname, do you get the 2195 AGAIN?
Can you re-create the issue on the test environment?
If you can't then you can't troubleshoot it.
If you CAN re-create the issue on the test environment, then you can do more diagnostics, including confirming that the receiver side thinks the channel has actually started. |
|
| Back to top |
|
|
| jpeela |
| Posted: Tue Sep 14, 2010 7:45 am Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
No I dont think if i can recreate the problem. But I can try doing what we did earlier and check if we come across same situation. I will update you tomorrow with the outcome. But if you find anything of same sort, please let me know. Thanks for all your support.
_________________
Jogi |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Tue Sep 14, 2010 11:19 am Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
After changing the channel, have you stopped it and restarted it?
Did you ping the channel after you stopped it? 
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| bruce2359 |
| Posted: Tue Sep 14, 2010 12:39 pm Post subject: |
|
|
Poobah
Joined: 05 Jan 2008
Posts: 9469
Location: US: west coast, almost. Otherwise, enroute.
|
PING works only on a non-started sender channel.
_________________
I like deadlines. I like to wave as they pass by.
ב''ה
Lex Orandi, Lex Credendi, Lex Vivendi. As we Worship, So we Believe, So we Live. |
|
| Back to top |
|
|
| fjb_saper |
| Posted: Tue Sep 14, 2010 1:51 pm Post subject: |
|
|
Grand High Poobah
Joined: 18 Nov 2003
Posts: 20756
Location: LI,NY
|
Well I would expect an FDC to be produced with a 2195.
Did you find a corresponding FDC?
_________________
MQ & Broker admin |
|
| Back to top |
|
|
| jpeela |
| Posted: Wed Sep 15, 2010 11:34 pm Post subject: |
|
|
Centurion
Joined: 23 Jan 2006
Posts: 139
|
mqjeff wrote
| Quote: |
If you go back to the machine in which you recreated the channel, and you AGAIN change the conname, do you get the 2195 AGAIN?
Can you re-create the issue on the test environment? |
No I tried doing the same but this time i dont see any error. I mean am not able to recreate the problem.
fjb_saber wrote
| Quote: |
After changing the channel, have you stopped it and restarted it?
Did you ping the channel after you stopped it? |
yes I stopped , changed and pinged before trying to start it. and it threw 2195
| Quote: |
| Well I would expect an FDC to be produced with a 2195 |
No FDC's generated. That's what is puzzling me.
How would i experiment on a situation like this to recreate and raise a PMR or how to diagnose this problem without FDC's and wierd errors in logs. Need help  Thanks in advance.
_________________
Jogi |
|
| Back to top |
|
|
|
|
