| Author |
Message
|
| waugh |
 Posted: Tue Sep 07, 2004 10:19 am Post subject: CSD 03 - ToolKit - message flows not showing up in debug |
 |
|
Master
Joined: 19 Feb 2004
Posts: 225
|
Hello All,
message flows are not showing up in debug, when i attach execution group i do not see message flows under it.
this is happening after i installed CSD03. also installed latest version of agent controller from CSD download page. that didn't help.
my REGEDIT, Add/Remove programs in control panel shows CSD 03. but my toolkit still shows 5.0.2.
i also ran toolkit update. still shows 5.0.2. its not just the version name, i can see some of the features from 5.0.3 toolkit are missing.
input is appreciated...
Thanks |
|
| Back to top |
|
 |
| PGoodhart |
| Posted: Tue Sep 07, 2004 10:33 am Post subject: |
|
|
Master
Joined: 17 Jun 2004
Posts: 278
Location: Harrisburg PA
|
Yes, I have had a ticket in with IBM for months for the remote debugging problems. Which platform/OS are you running?
I can confirm the same situation on the toolkit. Except I got the features I was expecting.
_________________
Patrick Goodhart
MQ Admin/Web Developer/Consultant
WebSphere Application Server Admin |
|
| Back to top |
|
|
| waugh |
| Posted: Tue Sep 07, 2004 10:39 am Post subject: |
|
|
Master
Joined: 19 Feb 2004
Posts: 225
|
| its not remote, its on a local machine, Windows 2000/DB2 FP 6/MQ 5.3 CSD07/WBIMB CSD03(I Think, toolkit still shows 5.0.2 though) |
|
| Back to top |
|
|
| PGoodhart |
| Posted: Tue Sep 07, 2004 11:20 am Post subject: |
|
|
Master
Joined: 17 Jun 2004
Posts: 278
Location: Harrisburg PA
|
Well then, have you started the RAC?
_________________
Patrick Goodhart
MQ Admin/Web Developer/Consultant
WebSphere Application Server Admin |
|
| Back to top |
|
|
| waugh |
| Posted: Tue Sep 07, 2004 1:55 pm Post subject: |
|
|
Master
Joined: 19 Feb 2004
Posts: 225
|
Yes,
I have my agent controller started. If I do not start i will get error message. i do not see any error messages in agent controller logs or application log |
|
| Back to top |
|
|
| waugh |
| Posted: Wed Sep 08, 2004 4:51 am Post subject: |
|
|
Master
Joined: 19 Feb 2004
Posts: 225
|
| I uninstalled toolkit and installed again then applied CSD03, created broker in CSD03, now debug works fine. looks like if the broker is created using csd02 and you try to install csd03 on same machine we may see this problem. |
|
| Back to top |
|
|
| PGoodhart |
| Posted: Wed Sep 08, 2004 4:55 am Post subject: |
|
|
Master
Joined: 17 Jun 2004
Posts: 278
Location: Harrisburg PA
|
Very interesting, thanks for posting the follow up...
I know that you also have to start the RAC and broker in a specific order.
So you may have transposed the startup order during your reinstall (then it may work). Just something else to check if it happens again.
_________________
Patrick Goodhart
MQ Admin/Web Developer/Consultant
WebSphere Application Server Admin |
|
| Back to top |
|
|
| Kjell |
| Posted: Wed Nov 03, 2004 10:47 am Post subject: I have the same problem |
|
|
Acolyte
Joined: 26 Feb 2002
Posts: 73
|
Hi
I am in the same situation, so if you guys could clarify some details around your findings:
1. Do you mean that we DO need CSD03 on the broker to make it possible at all to remote-debug? If so, do we have to uninstall the broker and install it again, or can we just apply CSD03?
2. When I try to remote debug it complains about the Agent Controller being unavailable. It prompts me to check it, and to check so it allows my machine to communicate with it. The strange thing is that when we allow "ALL" in the Agent it does not work at all, but when we do "custom" and allow the Ip-adress of my toolkit explicitly it work a bit better (however, still not OK). It also prompts me to seup the correct ports for the RAC. What does it mean? Where do I set the ports to communicate with the RAC?
3. When you say "start in a certain order", can you be more precise?
many thanks in advance. /K |
|
| Back to top |
|
|
| kirani |
| Posted: Wed Nov 03, 2004 3:43 pm Post subject: |
|
|
Jedi Knight
Joined: 05 Sep 2001
Posts: 3779
Location: Torrance, CA, USA
|
| Kjell wrote: |
1. Do you mean that we DO need CSD03 on the broker to make it possible at all to remote-debug? If so, do we have to uninstall the broker and install it again, or can we just apply CSD03?
|
I am not sure about the first part, but you don't need to uninstall the broker. Just install the CSD3 on top of older CSD.
| Kjell wrote: |
2. When I try to remote debug it complains about the Agent Controller being unavailable. It prompts me to check it, and to check so it allows my machine to communicate with it. The strange thing is that when we allow "ALL" in the Agent it does not work at all, but when we do "custom" and allow the Ip-adress of my toolkit explicitly it work a bit better (however, still not OK). It also prompts me to seup the correct ports for the RAC. What does it mean? Where do I set the ports to communicate with the RAC?
|
Take a look at serviceconfig.xml file in <ibm_rac_home>\config directory. I think you can change the port number there.
| Kjell wrote: |
3. When you say "start in a certain order", can you be more precise?
|
Start the RAC first before you start the Broker.
_________________
Kiran
IBM Cert. Solution Designer & System Administrator - WBIMB V5
IBM Cert. Solutions Expert - WMQI
IBM Cert. Specialist - WMQI, MQSeries
IBM Cert. Developer - MQSeries
|
|
| Back to top |
|
|
| Kjell |
| Posted: Wed Nov 10, 2004 10:55 pm Post subject: |
|
|
Acolyte
Joined: 26 Feb 2002
Posts: 73
|
| We had it work, via upgrading to FP4 on everything. |
|
| Back to top |
|
|
|
|
