Posted: Tue Jul 28, 2015 10:45 pm Post subject: SAPJCO lib files not found exception after wmb upgrade to 8
Newbie
Joined: 28 Jul 2015 Posts: 2
Hello Team,
I am facing problem while connecting with SAP server with out adapter.
Error:
2015-07-28 13:15:02.505960 9269 RecoverableException BIP3522E: The adapter was unable to locate a required Java library.
The most likely cause of this exception is that the client libraries for the Enterprise Information System (EIS) are missing from the system. The EIS client libraries are not supplied with the message broker product and have to be obtained separately from the EIS provider. If the EIS client libraries have been installed and the broker has been configured to use them then make sure they have the correct permissions and that configurable service points to the correct location. The missing resource which caused this problem was: ''com.sap.conn.idoc.IDocTraceListener''. If the problem persists then it might be due to an internal problem with the product.
Obtain the missing client libraries from the EIS vendor and configure the broker to have access to these files using mqsichangeproperties command. If you are using SAP then ensure you have JCO3 and not JCO2. Consult the documentation for the exact details (topic an09140). If this is not the cause of the missing class exception then contact IBM support.
I did set the EIS path properly and used sapjco3 jar files on AIX server:
EISProviders
SAP
jarsURL='/home/neal/SAP'
nativeLibs='/home/neal/SAP'
Files:
sapjco3.jar
libsapjco3.so
Still getting same issue, Also we had WMB upgrade from 6.1 to 8.0 and out adapter was created in WMB 6.1 (Getting issue after WMB upgrade).
Do I need to migrate my adapters to WMB 8.0?
Joined: 10 Feb 2003 Posts: 6076 Location: Somewhere over the Rainbow this side of Never-never land.
AFAIK, the libraries that worked with V6.1 won't work (or work very well) with V8.
I'd get the latest SAP Libraries and put them in a different directory to the old ones. Then change the EIS config.
You probably will need the help of your SAP admins to get the libraries. SAP keep access to this stuff tightly controlled. _________________ WMQ User since 1999
MQSI/WBI/WMB/'Thingy' User since 2002
Linux user since 1995
Every time you reinvent the wheel the more square it gets (anon). If in doubt think and investigate before you ask silly questions.
We got the latest sapjco libraries compatible with WMB 8.0 ie sapjco3 library files.
I did the changes in EIS config to set path to new library files and restarted the broker.
WMB 6.1 was using sapjco.jar.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum