The fields in these panels define the attributes of the channels. The channel settings panel fields that you can change are shown in Table 38. You can find details for each field in Chapter 6, Channel attributes.
A "Yes" signifies that the field is available for use with the
indicated type of channel, while an "O" means that these fields are
only needed for server channels when they are to be used as sender
channels.
Table 38. Channel attribute fields per channel type
| Attribute field | Sender | Server | Receiver | Requester |
|---|---|---|---|---|
| Batch size | Yes | Yes | Yes | Yes |
| CICS profile name | Yes | O | Yes | |
| Connection name | Yes | O | Yes | |
| Disconnect interval | Yes | Yes |
| |
| LU62 TP name (see Note) | Yes | O | Yes | |
| Maximum message size | Yes | Yes | Yes | Yes |
| Maximum transmission size | Yes | Yes | Yes | Yes |
| Message exit | Yes | Yes | Yes | Yes |
| PUT authority | Yes | Yes | ||
| Retry count | Yes | O | Yes | |
| Retry fast interval | Yes | O | Yes | |
| Retry slow interval | Yes | O | Yes | |
| Receive exit | Yes | Yes | Yes | Yes |
| Sequence number wrap | Yes | Yes | Yes | Yes |
| Sequential delivery | Yes | Yes | Yes | Yes |
| Security exit | Yes | Yes | Yes | Yes |
| Send exit | Yes | Yes | Yes | Yes |
| Target system identifier | Yes | Yes | Yes | Yes |
| Transmission queue name | Yes | Yes |
| |
| Transaction identifier | Yes | O | Yes | |
| ||||
Table 39. Settings for LU 6.2 TP name on the local z/OS system for a remote queue manager platform
| Remote platform | Sender/server | Requester |
|---|---|---|
| z/OS using CICS | CKRC | CKSV1 |
| z/OS without CICS and UNIX systems | As specified in the side information on remote queue manager system | As specified in the side information on remote queue manager system |
| OS/2 | As specified in the OS/2 Run Listener command, or defaulted from the OS/2 queue manager configuration file | As specified in the OS/2 Run Listener command, or defaulted from the OS/2 queue manager configuration file |
| OS/400 | The same as the compare value in the routing entry on the OS/400 system | The same as the compare value in the routing entry on the OS/400 system |
| Digital OVMS | As specified in the Digital OVMS Run Listener command | As specified in the Digital OVMS Run Listener command |
| Compaq NonStop Kernel | The same as the TPNAME specified in the receiver-channel definition | The same as the TPNAME specified in the receiver-channel definition |
| Windows NT | As specified in the Windows NT Run Listener command, or the invokable Transaction Program that was defined using TpSetup on Windows NT | As specified in the Windows NT Run Listener command, or the invokable Transaction Program that was defined using TpSetup on Windows NT |
| ||
If you have more than one queue manager on the same machine, ensure that the TPnames in the channel definitions are unique. To modify a TPname, use CSQ4SIDE or CKMC.
This section provides details of the sender channel settings panel, as shown in Figures Figure 70 and Figure 71.
Figure 70. The sender channel settings panel
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTB1 HURSLEY.TO.SYDNEY - Settings VICY14 |
| |
| |
| More: + |
| Channel type . . . . . . : SENDER |
| |
| Target system id . . . . : |
| Transmission queue name . : TX1 |
| Batch size . . . . . . . : 0001 |
| Sequence number wrap . . : 0999999 |
| Max message size . . . . : 0032000 |
| Max transmission . . . . : 32000 |
| Disconnect interval . . . : 0001 |
| Transaction id . . . . . : CKSG |
| Connection name . . . . . : HtoH |
| CICS profile name . . . . : |
| LU 6.2 TP name . . . . . : CKRC |
| |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
Figure 71. The sender channel settings panel - screen 2
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTC1 HURSLEY.TO.SYDNEY - Settings VICY14 |
| |
| |
| More: - |
| Channel type . . . . . . : SENDER |
| |
| Sequential delivery . . . : 0 (0=No or 1=Yes) |
| |
| Retry |
| Count . . . . . . . . . : 005 |
| Fast interval . . . . . : 005 |
| Slow interval . . . . . : 030 |
| |
| Exit routines |
| Security . . . . . . . : |
| Message . . . . . . . . : |
| Send . . . . . . . . . : |
| Receive . . . . . . . : |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
This section provides details of the receiver channel settings panels, as shown in Figures Figure 72 and Figure 73.
Figure 72. The receiver channel settings panel
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTB3 VICY13.TO.VICY14 - Settings VICY14 |
| |
| |
| More: + |
| Channel type . . . . . . : RECEIVER |
| |
| Target system id . . . . : |
| |
| Batch size . . . . . . . : 0100 |
| Sequence number wrap . . : 0099920 |
| Max message size . . . . : 0032000 |
| Max transmission . . . . : 32000 |
| |
| |
| |
| |
| |
| |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
Figure 73. The receiver channel settings panel - screen 2
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTC3 VICY13.TO.VICY14 - Settings VICY14 |
| |
| Type information. Then select an action. |
| More: - |
| Channel type . . . . . . : RECEIVER |
| |
| Sequential delivery . . . : 1 (0=No or 1=Yes) |
| Put authority . . . . . . : 1 (1=Process or 2=Context) |
| |
| |
| |
| |
| |
| Exit routines |
| Security . . . . . . . : |
| Message . . . . . . . . : |
| Send . . . . . . . . . : |
| Receive . . . . . . . . : |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
This section provides details of the server channel settings panels, as shown in Figures Figure 74 and Figure 75.
Figure 74. The server channel settings panel
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTB1 HURSLEY.TO.SYDNEY - Settings VICY14 |
| |
| |
| More: + |
| Channel type . . . . . . : SERVER |
| |
| Target system id . . . . : |
| Transmission queue name . : TX1 |
| Batch size . . . . . . . : 0001 |
| Sequence number wrap . . : 0999999 |
| Max message size . . . . : 0032000 |
| Max transmission . . . . : 32000 |
| Disconnect interval . . . : 0001 |
| Transaction id . . . . . : |
| Connection name . . . . . : |
| CICS profile name . . . . : |
| LU 6.2 TP name . . . . . : |
| |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
Figure 75. The server channel settings panel - screen 2
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTC1 HURSLEY.TO.SYDNEY - Settings VICY14 |
| |
| |
| More: - |
| Channel type . . . . . . : SERVER |
| |
| Sequential delivery . . . : 0 (0=No or 1=Yes) |
| |
| Retry |
| Count . . . . . . . . . : 005 |
| Fast interval . . . . . : 005 |
| Slow interval . . . . . : 030 |
| |
| Exit routines |
| Security . . . . . . . : |
| Message . . . . . . . . : |
| Send . . . . . . . . . : |
| Receive . . . . . . . : |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
This section provides details of each field in the requester channel settings panels, as shown in Figures Figure 76 and Figure 77.
Figure 76. The requester channel settings panel
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTB4 VICY13.TO.VICY14.CB - Settings VICY14 |
| |
| |
| More: + |
| Channel type . . . . . . : REQUESTER |
| |
| Target system id . . . . : |
| |
| Batch size . . . . . . . : 0001 |
| Sequence number wrap . . : 0999999 |
| Max message size . . . . : 0032000 |
| Max transmission . . . . : 32000 |
| |
| Transaction id . . . . . : CKRQ |
| Connection name . . . . . : VC13 |
| CICS profile name . . . . : LU6PROF |
| LU 6.2 TP name . . . . . : CKSV |
| |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+
Figure 77. The requester channel settings panel - screen 2
+--------------------------------------------------------------------------------+
| Channel Help |
| ------------------------------------------------------------------------------ |
| MCATTC4 VICY13.TO.VICY14.CB - Settings VICY14 |
| |
| |
| More: - |
| Channel type . . . . . . : REQUESTER |
| |
| Sequential delivery . . . : 0 (0=No or 1=Yes) |
| Put authority . . . . . . : 1 (1=Process or 2=Context) |
| |
| Retry |
| Count . . . . . . . . . : 005 |
| Fast interval . . . . . : 005 |
| Slow interval . . . . . : 030 |
| Exit routines |
| Security . . . . . . . : |
| Message . . . . . . . . : |
| Send . . . . . . . . . : |
| Receive . . . . . . . . : |
| |
| |
| F1=Help F3=Exit F5=Refresh now F7=Bkwd F8=Fwd F10=Menu Bar |
| F12=Cancel |
+--------------------------------------------------------------------------------+