Table 29 presents a worksheet listing all the parameters needed to set up communication from Solaris using SNAP-IX to one of the other WebSphere MQ platforms. The worksheet shows examples of the parameters, which have been tested in a working environment, and leaves space for you to fill in your own values. An explanation of the parameter names follows the worksheet. Use the worksheet for the platform to which you are connecting.
Use this worksheet to record the values you use for your
configuration. Where numbers appear in the Reference column they
indicate that the value must match that in the appropriate worksheet elsewhere
in this book. The examples that follow in this chapter refer to the
values in the ID column. The entries in the Parameter Name column are
explained in Explanation of terms.
Table 29. Configuration worksheet for SNAP-IX
| ID | Parameter Name | Ref. | Example | User Value |
|---|---|---|---|---|
| Parameters for local node | ||||
| (1) | Configuration file name |
| sna_node.cfg |
|
| (2) | Control point name |
| SOLARXPU |
|
| (3) | Node ID to send |
| 05D 23456 |
|
| (4) | Network name |
| NETID |
|
| (5) | Local APPC LU |
| SOLARXLU |
|
| (6) | APPC mode |
| #INTER |
|
| (7) | Invokable TP |
| MQSERIES |
|
| (8) | Local MAC address |
| 08002071CC8A |
|
| (9) | Port name |
| MQPORT |
|
| (10) | Command path |
| /opt/mqm/bin/amqcrs6a |
|
| (11) | Local queue manager |
| SOLARIS |
|
| Connection to an OS/2 system
The values in this section of the table must match those used in the Table for OS/2 and LU6.2, as indicated. | ||||
| (12) | Link station name |
| OS2CONN |
|
| (13) | Network name | (2) | NETID |
|
| (14) | CP name | (3) | OS2PU |
|
| (15) | Remote LU | (6) | OS2LU |
|
| (16) | Application TP | (8) | MQSERIES |
|
| (17) | Mode name | (17) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| OS2CPIC |
|
| (19) | Remote network address | (10) | 10005AFC5D83 |
|
| (20) | Node ID to receive | (4) | 05D 12345 |
|
| Connection to a Windows system
The values in this section of the table must match those used in the Table for Windows and LU6.2, as indicated. | ||||
| (12) | Link station name |
| NTCONN |
|
| (13) | Network name | (2) | NETID |
|
| (14) | CP name | (3) | WINNTCP |
|
| (15) | Remote LU | (5) | WINNTLU |
|
| (16) | Application TP | (7) | MQSERIES |
|
| (17) | Mode name | (17) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| NTCPIC |
|
| (19) | Remote network address | (9) | 08005AA5FAB9 |
|
| (20) | Node ID to receive | (4) | 05D 30F65 |
|
| Connection to an AIX system
The values in this section of the table must match those used in the Table for AIX and LU6.2, as indicated. | ||||
| (12) | Link station name |
| AIXCONN |
|
| (13) | Network name | (1) | NETID |
|
| (14) | CP name | (2) | AIXPU |
|
| (15) | Remote LU | (4) | AIXLU |
|
| (16) | Application TP | (6) | MQSERIES |
|
| (17) | Mode name | (14) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| AIXCPIC |
|
| (19) | Remote network address | (8) | 123456789012 |
|
| (20) | Node ID to receive | (3) | 071 23456 |
|
| Connection to an AT&T GIS (NCR) UNIXUNIX system
The values in this section of the table must match those used in the table the Table for AT&T GIS UNIX and LU6.2, as indicated. | ||||
| (12) | Link station name |
| GISCONN |
|
| (13) | Network name | (2) | NETID |
|
| (14) | CP name | (3) | GISPU |
|
| (15) | Remote LU |
| GISLU |
|
| (16) | Application TP | (5) | MQSERIES |
|
| (17) | Mode name | (7) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| GISCPIC |
|
| (19) | Remote network address | (8) | 10007038E86B |
|
| (20) | Node ID to receive | (9) | 03E 00018 |
|
| Connection to an HP--UX system
The values in this section of the table must match those used in the Table for HP--UX and LU6.2, as indicated. | ||||
| (12) | Link station name |
| HPUXCONN |
|
| (13) | Network name | (2) | NETID |
|
| (14) | CP name | (3) | HPUXPU |
|
| (15) | Remote LU | (7) | HPUXLU |
|
| (16) | Application TP | (8) | MQSERIES |
|
| (17) | Mode name | (17) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| HPUXCPIC |
|
| (19) | Remote network address | (5) | 10005FC5D83 |
|
| (20) | node ID to receive | (6) | 05D 54321 |
|
| Connection to an iSeries system
The values in this section of the table must match those used in the Table for AS/400(R) and LU6.2, as indicated. | ||||
| (12) | Link station name |
| AS4CONN |
|
| (13) | Network name | (1) | NETID |
|
| (14) | CP name | (2) | AS400PU |
|
| (15) | Remote LU | (3) | AS400LU |
|
| (16) | Application TP | (8) | MQSERIES |
|
| (17) | Mode name | (17) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| AS4CPIC |
|
| (19) | Remote network address | (4) | 10005A5962EF |
|
| Connection to a z/OS system without CICS
The values in this section of the table must match those used in the Table for z/OS and LU6.2, as indicated. | ||||
| (12) | Link station name |
| MVSCONN |
|
| (13) | Network name | (2) | NETID |
|
| (14) | CP name | (3) | MVSPU |
|
| (15) | Remote LU | (4) | MVSLU |
|
| (16) | Application TP | (7) | MQSERIES |
|
| (17) | Mode name | (10) | #INTER |
|
| (18) | CPI-C symbolic destination name |
| MVSCPIC |
|
| (19) | Remote network address | (8) | 400074511092 |
|
| Connection to a VSE/ESA system
The values in this section of the table must match those used in the Table for VSE/ESA and LU6.2, as indicated. | ||||
| (12) | Link station name |
| VSECONN |
|
| (13) | Network name | (1) | NETID |
|
| (14) | CP name | (2) | VSEPU |
|
| (15) | Remote LU | (3) | VSELU |
|
| (16) | Application TP | (4) | MQ01 | MQ01 |
| (17) | Mode name |
| #INTER |
|
| (18) | CPI-C symbolic destination name |
| VSECPIC |
|
| (19) | Remote network address | (5) | 400074511092 |
|